redunshee
Addicted to ArboristSite
I'd be in tested in a couple
Nik's Poulan Thread
- Thread starter FATGUY
- Start date
Help Support Arborist Forum:
I'd be in tested in a couple
I'll put you down for two Bob.
procarbine2k1
Addicted to ArboristSite
Sounds good Jeff :msp_thumbup: I'll trade ya a T-shirt for a set of decals.
I hear ya with the "Linksbucks" pain in the ass thing. :msp_mad: I havn't been able to get on at all the last couple days because of it. All of a sudden it worked this afternoon. I tried different browsers, different PC's, none would get me on Arboristsite. I hope they get it taken care of for good..SOON!!!
Gregg,
Your set has already been paid for buddy.
procarbine2k1
Addicted to ArboristSite
Me too :msp_tongue:
I will believe it when I see it lol.
You can ride with me, I will be rolling by your neck of the woods about 530am.. :msp_w00t:
procarbine2k1
Addicted to ArboristSite
If any of you guys need to get ahold of me, email me at my forum name here at aol.com, or if you have my number call me there. I can check my email on my phone... And on top of the hacker BS, my TWC modem is crapping out at the house. I refuse to continue my "lease" on this thing, and bought a compatible unit that should be here in a few days. Sometimes I can stay on the internet for 30 minutes, sometimes it will boot me in a couple. I keep resetting the thing, just doesn't always keep me on. I think I have everyone covered that messaged me about decals, but if you aren't sure email me. Looking forward to seeing everyone.
Thought you guys would like this video, I thought it was a pretty cool contraption.
Home Built Chainsaw Winch - YouTube
Home Built Chainsaw Winch - YouTube
Wow! That is really a piece of work.
DrTszap
ArboristSite Lurker
Just add the QuickJava addon to firefox and you can disable/enable javascript on the fly (along with Java, Flash, Silverlight, Cookies, Images, Animated Images, and CSS stylesheets). Hopefully someone will exterminate the LinkBucks malware soon!
Cannon51
ArboristSite Operative
46cc Craftsman-Poulan
I bought this saw off craigslist last Feb and could only get it to run wide open. I thought it had an air leak but after changing fuel line and gaskets and diaphragm it seems to be running good. I have the Lo 2 1/2 out and the Hi 3 turns out. Does that seem like to much, I don't want to cover up a leak with fat jetting? It will set and idle just below where the chain starts turning and I ran a tank of gas through it cutting a small ash. I need a cover-chain brake and muffler heat shield for it. I think I will post in the swap section for that and some other stuff when the Linkbucks situation is resolved.
I tried to post a picture of the saw but I am using Chrome with the Javascript blocked and could not get one to load.
Cannon
I bought this saw off craigslist last Feb and could only get it to run wide open. I thought it had an air leak but after changing fuel line and gaskets and diaphragm it seems to be running good. I have the Lo 2 1/2 out and the Hi 3 turns out. Does that seem like to much, I don't want to cover up a leak with fat jetting? It will set and idle just below where the chain starts turning and I ran a tank of gas through it cutting a small ash. I need a cover-chain brake and muffler heat shield for it. I think I will post in the swap section for that and some other stuff when the Linkbucks situation is resolved.
I tried to post a picture of the saw but I am using Chrome with the Javascript blocked and could not get one to load.
Cannon
Thanks Dr.
I tried getting on AS with Firefox this morning, got the linksbuck thing again. Worked last night. I tried the no scripts thing in Chrome & Firefox. Now Im on Firefox and it worked!!! Don't know how long though.
Thanks,
Gregg
Andy, That thing is cool.:msp_thumbup: Wonder how that would work with a Poulan Super72 gear reduction drive. 92cc lots-o-grunt. Trouble is..I don't have a Super72 or smart enough to build that winch contraption to find out...LOL
Gregg,
You must be going by in the work truck. :hmm3grin2orange: I was talking I might wake up by then and get ready to leave
:hmm3grin2orange::hmm3grin2orange:zogger
Tree Freak
I have found some of the newer poulans do in fact take quite a few turns out as a setting. Why they went from 1 turn out as a ballpark i don't know.
If you are worried about leaks..only way to really know is to test it.
Just accumulate more free or cheap poulan junkers, that is the easiest way to get spare parts. most small engine shops will have a pile out back.
procarbine2k1
Addicted to ArboristSite
You must be going by in the work truck. :hmm3grin2orange: I was talking I might wake up by then and get ready to leave
lol
That is really cool.
FWIW I got the Poulan 46 Bow saw all ready to go for the GTG. Found I couldn't get the missing washer I needed for the clutch right now but found the 2 shoe style with the regular coil springs from a 54 is a direct fit and it works just fine.
Got a thin line 18" roller nose bar on a junker Remington saw today and thought it would be a better bar to put on my Poulan 47 so I cleaned it up, sharpened the chain and it cut well but I found the oiler to not be working again.. .
It appears the the inlet check valve is not working and allowing it to pump oil back out the inlet line. Will see what I can do about that tomorrow.
Seems I cant post pictures with the Java disabled......
Last edited:
MS460WOODCHUCK
Addicted to ArboristSite
When was the GTG? I'm thinking Gregg posted that it was on the 12th or 13th but it has been a while and this crap with the pop up's on AS has kept me from getting on here lately. I hope I didn't miss it...
12th.
I cant find his address to put in new Garmin either. I started a new part in the old poulan gtg thread elsewhere to keep track till they get crap fixed here.
I cant find his address to put in new Garmin either. I started a new part in the old poulan gtg thread elsewhere to keep track till they get crap fixed here.
What carb is on that saw?My 46cc Poulan runs at 1 3/4 on the Low and 1 1/2 on the high and i can say it runs on the rich side.Does the saw hold the tune?
As for the Linkbucks.Type on Google:NoScript for firefox.Then instal the addon and after the restart of firefox you will see an "S" with a "!" beside the address bar.If you click that symbol,you can block the Linkbucks only.If you use a different browser,type Noscript for the browser you use.
Cannon51
ArboristSite Operative
It's a Walbro WT529 on 87 Oct with ethonol-3 1/2 oz oil- 1 oz seafoam. At WOT out of the cut it blubbers some, and will set and idle just after cranking cold. I think it's a little rich on both ends but thats better than lean. That said I don't know a lot about 2 stroke diaphram carbs.
I have the scrips disabled on Crome in the house but can't log on. I'm in the garage on a old Ubuntu with a no scripts add on now.
Cannon
Well i am far from an expert too.2 1/2 on the low seems ok but 3 turns on the high seems too much but that depends on each carb.Have you adjusted the height of the needle lever properly?
Only way to be sure for air leaks is a vacuum/presure test.
Only way to be sure for air leaks is a vacuum/presure test.
