Some saws you are told to strike the side of the flywheel 180 Deg from the magnet with the hammer. Works for me a lot..
Nik's Poulan Thread
- Thread starter FATGUY
- Start date
Help Support Arborist Forum:
Some saws you are told to strike the side of the flywheel 180 Deg from the magnet with the hammer. Works for me a lot..
That makes sense. I have never done it that way.
I fixed this pretty easily if you like fiddling around with some Benzomatic rod and a torch that's puts out more heat than a propane torch.
If you're game, let me know and I'll put together a little write up with pics.
Come on now we a need a before and after pic of that cylinder.
Came back into the dealer where it was sold at many years ago. They cant get parts anymore for the fixes.
2 months later coming to a new home, mine. I got the parts already on the shelf's.
2 months later coming to a new home, mine. I got the parts already on the shelf's.
That extra hole is for the oil tank air vent. Make sure the vent tube is up in the top corner of the oil tank . If it vibrates out it can siphon the oil out and make a mess.
why the change in design from the type 123 models? the oil tank is vented through the cap? or some other place on the case?
I don't know why they changed the design but the ipl shows a vent kit available. No on the oil cap vent.
Scored the good stuff. Found out one of our suppliers at work is linked with sunbelt. As long as I get it on a stock order I get free shipping.
NOS Poulan 3400 saw sailing for $650 now, go baby go!
http://www.ebay.com/itm/Nos-vintage...762980?hash=item3f736251e4:g:McYAAOSwImRYdpQT
http://www.ebay.com/itm/Nos-vintage...762980?hash=item3f736251e4:g:McYAAOSwImRYdpQT
That's it of $$$ for that saw
Steve
Steve
At $650 they are very rare.
Figure I would offer up a whole saw 365 3500 or the parts needed to help on rebuild. So I took a whole running cutting saw and pulled the parts needed for the members rebuild.
Thanks Jeremiahjohnson. Your help is very much appreciated! You da man!
Thats a buy it now price, theres no bids or offer yet
-•------------------------------------------------------------
Just a home owner that likes the older better made machines
Craftsman 3.7 x2
Husqvarna 36
That's the F----tard price
brandonstc6
Addicted to ArboristSite
I do have a good flywheel from a 335 Poulan that I can spare. I would sell it cheap to help out the guy who needed it.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Similar threads
