Nik's Poulan Thread

[s sidewall]

The vent on my 2800 had the valve in the tank with the inline fitting connecting to the vent line pulled through the tank and routed up to the carb and the copper filter plug pushed inside of the line at the end.

Steve

 

[s sidewall]

Not a bad load of wood boomer, think I wood had put a little more on there though

Steve

 

[Boomer 87]

Not a bad load of wood boomer, think I wood had put a little more on there though

Steve

That was the whole tree! Lol

 

[rocketnorton]

View attachment 556273 check out whats coming home with me tonight.

like the saws. got a bike to go w/that hd sticker?

mine...

 

[Boomer 87]

like the saws. got a bike to go w/that hd sticker?

mine...

View attachment 556294

I do..... but i had the sticker long before the bike. ..... its not a harley

 

[s sidewall]

Harleys in the barn, hasn't been ridden in over a year.

Steve

 

[Boomer 87]

Im sellin mine for that exact reason. Dont get rode anymore.

 

[s sidewall]

That's why mines in the barn, wife don't think I'll ever ride it again. Got to be able to look around ya while riding a be able to react fast, can do that any more.

Steve

 

[Acornhill]

Is this bar regular 3/8 or LP?

Sent from my LG-D800 using Tapatalk

 

[Boomer 87]

Had a tractor trailer turn in front of me once. Pullin a hopper bottom luckily i had a feeling they were going to so i locked up the brakes. Otherwise i would of caught the trailer right at the neck.

 

[s sidewall]

Always got to watch the other guy

Steve

 

[redunshee]

Looks great, surely they pulled out the old broken off bolt tip end when they ground out the slot to fill weld it.

Do you need me to make you a custom exhaust gasket out of Felpro 3009 for that? as the IPL doesn't show one...

View attachment 556086

View attachment 556087

Not really. I have a gasket that fits between the muffler and heat deflector. It's triangular with three bolt holes.

 

[s sidewall]

Didn't know there was a gasket between the muffler and cylinder.

Steve

 

[s sidewall]

Is this bar regular 3/8 or LP?

<br /><br />Sent from my LG-D800 using Tapatalk
Looks like a top handle Craftsman L.P. 3/8 bar per my googling.

Steve

 

[s sidewall]

Here's the info for it, https://www.google.com/url?q=https:...gghMAI&usg=AFQjCNF-TvdMCzR2YcS2IGDndpkdyFzZ8w

Steve

 

[hotshot]

Not really. I have a gasket that fits between the muffler and heat deflector. It's triangular with three bolt holes.

Fine, just assuming/thinking that's why the PO overtightened the bolts in the first place...

Did they get the old busted bolt stub out?

 

[redunshee]

Fine, just assuming/thinking that's why the PO overtightened the bolts in the first place...

Did they get the old busted bolt stub out?

Not sure. I doubt it as it was extremely difficult to see. I figure I'll need to use a shorter bolt on that side.

 

[rocketnorton]

they'da had hard time getting a good alum weld w/it in there. looked like it was done properly.

 

[Acornhill]

Is this bar regular 3/8 or LP?

<br /><br />Sent from my LG-D800 using Tapatalk
Looks like a top handle Craftsman L.P. 3/8 bar per my googling.

Steve

it is a 3/8" LP banana bar. it was on the Deluxe super 25 i just picked up. it does have the single oiler hole on the reverse side.

 

[hotshot]

they'da had hard time getting a good alum weld w/it in there. looked like it was done properly.

Exactly!