Nik's Poulan Thread

[redunshee]

Anyone have an extra good condition 3400 clutch cover? The 3400 I just fixed up is good except the chain tension part of the cover is broken so I can't use it. Let me know, thanks!

Here is the said saw, nice shape after cleanup and replacing the fuel tank, clutch, fuel lines and muff mod!

View attachment 618685

Out of luck on my end. Sorry

 

[Acornhill]

Out of luck on my end. Sorry

I have 5 plastic covers but zero mag ones


Sent from my iPhone using Tapatalk

 

[Acornhill]

I picked up a 330 that has a large hole in the oil tank, you guessed it right behind the Adjuster screw, saw runs perfect otherwise, can this be welded up? Is the case magnesium?


Sent from my iPhone using Tapatalk

 

[RedneckChainsawRepair]

yep Roger and Shaun weld them up.

 

[Acornhill]

This one is bad

how exactly do you do that?


Sent from my iPhone using Tapatalk

 

[rocketnorton]

copper slug in that slot & fill from inside.

 

[hotshot]

Let me look also. I have a box full of S25 parts and may have the circlips

Been looking over three years now since Bob’s post #32612 above, but I finally found a NOS bag of the S25DA & 25D piston pin cir-clips...had actually given up.

Hate to reuse the old ones.

The “C” shaped round wire ones usually come out bent since they don’t have any ears on them, nor any extraction reliefs cut in pistons, but that’s what I had been doing.

 

[Acornhill]

Been looking over three years now since Bob’s post #32612 above, but I finally found a NOS bag of the S25DA & 25D piston pin cir-clips...had actually given up.

Hate to reuse the old ones.

The “C” shaped round wire ones usually come out bent since they don’t have any ears on them, nor any extraction reliefs cut in pistons, but that’s what I had been doing.

Part # please?


Sent from my iPhone using Tapatalk

 

[blk05crew]

Out of luck on my end. Sorry

Thanks for looking!

 

[RedneckChainsawRepair]

This one is badhow exactly do you do that?


Sent from my iPhone using Tapatalk

AH. Because folks dont know how to line up bar adjuster pin and make sure it in is the bar hole. They then put the clutch cover on with pin behind bar and tighten down the bar nuts. This pushed the bar into pin which pushes into crankcase cracking or punching a hole in it. Like you see.

Seen many of them this way.

 

[scottr]

This one is bad

how exactly do you do that?


Sent from my iPhone using Tapatalk

A bent bar adjust screw and press on regardless .

 

[67L36Driver]

This one is bad

how exactly do you do that?


Sent from my iPhone using Tapatalk

I found one like that. My 202. Bar oil ran out as fast as I dumped it in.

On the workbench. [emoji37]

 

[hotshot]

Part # please?

Sent from my iPhone using Tapatalk

No part numbers on the items I picked up, but all S25 parts. He had points coils, oil pumps, FWs, and gaskets too that I bought.

Looking at an IPL, clips are 530015131

 

[3000 FPS]

Poulan 3750

 

[Acornhill]

Poulan 3750
View attachment 619447 View attachment 619448

Very nice


Sent from my iPhone using Tapatalk

 

[s sidewall]

Son inlaw got these today for me for $15 for both. Compression feels good, will check them over this weekend.

Steve

 

[redunshee]

Son inlaw got these today for me for $15 for both. Compression feels good, will check them over this weekend.

Steve

Great pick up. My first saw prior to my 3400 was a Micro. Still remember how my hands tingled from the vibration.

 

[s sidewall]

I have three versions now on these top handles. Don't know what model other one I got as y'all can see , no stickers.

Steve

 

[RedneckChainsawRepair]

Great pick up. My first saw prior to my 3400 was a Micro. Still remember how my hands tingled from the vibration.

Yep I had bought one new. Gave it to dad many years later to replace his mini mac he bought new. Gave him a trim saw with AV saw couple years ago so the poulan just sets now.

I cant take the vibrations to the hands anymore. So AV saws anymore for me.

 

[s sidewall]

They do sting the hands but I always wear padded gloves when a run a saw, always have whether it has av or not. Habit my dad got me into many moons ago, old homie sxl12.

Steve