Nik's Poulan Thread

[Gumneck]

Found this 24in Husq bar in the gutter/apron entrance to a 7/11 store. Forgot about it till I drug it out today. Had to jump on it a bit to remove a bow but otherwise I think it will work. Gonna tape up the Husq writing that's visible, sand down the rest and repaint. I see some stencils for 6 bucks on EBAY but think I''ll keep this a NO dollar project. Now just need a good 65CC Poulan or Pioneer to hang it on.....hmmm

 

[s sidewall]

https://asheville.craigslist.org/atq/d/hendersonville-vintage-poulan-chainsaw/7240572041.htmlSaw this Poulan sign on CL if anyone was interested, little pricey.

Steve from my moto g(7) play using Tapatalk

 

[joe25DA]

Found this 24in Husq bar in the gutter/apron entrance to a 7/11 store. Forgot about it till I drug it out today. Had to jump on it a bit to remove a bow but otherwise I think it will work. Gonna tape up the Husq writing that's visible, sand down the rest and repaint. I see some stencils for 6 bucks on EBAY but think I''ll keep this a NO dollar project. Now just need a good 65CC Poulan or Pioneer to hang it on.....hmmm

I found an 18” husky bar in the road. Never know what you’ll find

 

[s sidewall]

Too bad there wasn't a saw attached to it.

Steve from my moto g(7) play using Tapatalk

 

[user 172763]

I don't know this dude, just saw this post on Facebook. Looks like he might have had a small engine repair business or bought out supplies from one. From the map, he shouldn't be but about 20 miles from me. I am almost tempted to make him an offer on all those carbs. I am going to try to post the link, but not sure if I will be able to. I will try to go look at anything and get it for you to ship, if he doesn't.
Small Engine / Chainsaw Parts on FB

Here's a picture of the carbs, some I can see appear to never have been opened. A lot of Walbro's in there

 

[Ronie]

Anyone know where I can find some Poulan 31 rings, I've been looking for a couple of days now and can't locate any.

 

[hotshot]

Answered on the main forum, you posted the same question in two places...

 

[MS460WOODCHUCK]

Hey guys I just put my nice 336 in the trading post section if anyone interested. I will try here for a couple days before I list it elsewhere.

 

[MS460WOODCHUCK]

Hey guys I just put my nice 336 in the trading post section if anyone interested. I will try here for a couple days before I list it elsewhere.View attachment 880884

I have thought about changing tank, top covers and installing large intake and carb to see how the thin ring 54cc does compared to the single ring 3450 and 330 but can't bring myself to tear this saw apart being what it is.

 

[s sidewall]

It's pretty.

Steve from my moto g(7) play using Tapatalk

 

[drumbum]

Here are a few of mine in that series which is my all time favorite of any saws and the most firewood supplying saws I have ever owned. I've had more new NOS ones than I will ever remember before I owned them lol. Some were of the shelf from Farm and Fleet, some were of the shelf from TSC and some were off the shelf from a very kind elderly dealer of pioneer and poulan out of North Webster Indiana that is gone now. I remember seeing a wrapped pallet of 505's sitting there in boxes as tall as me but I already had 2 NOS 505's I just purchased. My NOS countervibes that are long gone before I found this site were from the local Coast to Coast. One of my dads life long friends worked in their repair shop and when they sold out he went to farm and fleet so we had a inside guy for a good amount of time right through the beginning of TSC after Farm and Fleet sold out. He is gone now also.

Heck of a post and a resounding endorsement of this fine series!
I may eventually have a 5th runner, if I ever find a top cover and a few other bits.

 

[RedneckChainsawRepair]

2 more 54cc heading out to a new owner. Spikes zip tied to hand guards.

Gave him a choice of the 3 nicest C 3.3 ones for one of those. Plus the 2 20" bars with craftsman on them in 325. I like using 16" 325. Only locals ever want the 20" bars.

What I been using for awhile now as packing. Water bottles. Way of reusing them and protection.

 

[neoborn]

PP5020av fuel tank to carb, fuel line size, would anyone happen to know?

 

[hotshot]

Poulan 530069599

Looks like 0.080” by 0.140”, very small stuff.

The standard size 0.094” ID tubing is used on the purge side plumbing. I’m not sure why though, as the carb fittings are the same size...

https://www.ebay.com/itm/Popular-On...737514?hash=item20d96cc46a:g:SqoAAOSwuTxWCpN4

 

[heimannm]

I found some cylinders as I am moving stuff to the new building. Do these look like Poulan? I think the boxes saw "Mercury Engineering"











Mark

 

[heimannm]

Next one











Mark

 

[heimannm]

Last one











Mark

 

[Todd Loosli]

The first one is for sure 3400 ,style, have to check bore for fit. I don't know about the other. It's a 3700 chrome bore. If you want to sell it let me know.

 

[Jethro 2t sniffer]

I found some cylinders as I am moving stuff to the new building. Do these look like Poulan? I think the boxes saw "Mercury Engineering"

View attachment 882380

View attachment 882381

View attachment 882382

View attachment 882383

View attachment 882384

Mark

1st 1 has a chrome bore by the look so 3700 or 4000. Eather way great find Mark. Hold it with two hands and run down the street n back.

 

[hotshot]

Yep, & second is for a blower like the 940 or 960, third is for a 3300.

That first one is worth an easy $100 to the Poulan restoration folks on fleabay.

https://rover.ebay.com/rover/1/711-...387137&hash=item2846427feb:g:Nt4AAOSwj99aCQfZ