rms61moparman
Addicted to ArboristSite
They aren't bad for what they are. Slightly more complicated to work on, and can quickly become a losing proposition if you are trying to get them running and flip them.
Mike
Nik's Poulan Thread
- Thread starter FATGUY
- Start date
Help Support Arborist Forum:
They aren't bad for what they are. Slightly more complicated to work on, and can quickly become a losing proposition if you are trying to get them running and flip them.
Mike
I keep them for parts saws and for loaners.
But they are so gutless IMHO compared to their non strato older brothers.
Compare sometime. I did again this summer and used 2-3 different strato and all were sub par cutters compared to the non strato.
Can they be made run good and not.so finicky. It seems like the one strato I had allways need tuning. Are the non strato like that
I got this 5200 in the mail today thinking it would be a parts saw. But it looks to be seldom used and has great compression. I think I’ll have to get it going soon instead of taking it apart.Did Poulan also have a 4200 in the dayton brand?
Thought I would post few more pics and a video of my old Poulan still gettin it done. Probably the last real big tree I'm gonna work on this year. The big trees is where the 5200 shines. I made maybe 1/2 dozen more bucking cuts after I turned the camera off, and like a dumb ass, I was cuttin in the dirt. After that, I could barely cut bark. So gave it up for today. Will have to sharpen the chain to cut more. Lotta wood in these old Oaks. Was 24" where I was cutting. Fat end is 30".
Gregg,
Gregg,
The Shooters Apprentice
Addicted to ArboristSite
I had a strato 42cc for awhile. I used it for my root saw, and then started to feel bad because it held up better then I expected. Cleaned it up, and muffler nodded it and it wasn’t a bad little saw. Ended up selling it to a coworker for $150
I have collected a few so far. Can they be made to run good and hold a tune or do they allways need adjustment. I'm contemplating selling the strato and going with the older saws not sure yet.
rms61moparman
Addicted to ArboristSite
I've only seen the 5200 85cc in Dayton. I just checked my saved threads and didnt have any 4200 in those listed. I checked the collectors site and only 52's and other too, no 42 I saw.
Pic of just one from collectors site
Dayton 4Z252
Pic of just one from collectors site
Just wanted to show couple pics that I wasn't slackin off, and did finish the job. lol Sharpened the chain but didn't cut good at all. So went and put my 30" Poulan bar back on and used that. Been using a cheaper 28" Forester bar last couple years, to save the better one some. Was thinking on one of my many rest breaks, how for 20 years I used nothing but a Poulan 3400 for all my wood cutting. Geeez, If I only knew about a 5200 back then.. Right tool for the job. So much easier. 
Gregg,
Gregg,
GaryJust wanted to show couple pics that I wasn't slackin off, and did finish the job. lol Sharpened the chain but didn't cut good at all. So went and put my 30" Poulan bar back on and used that. Been using a cheaper 28" Forester bar last couple years, to save the better one some. Was thinking on one of my many rest breaks, how for 20 years I used nothing but a Poulan 3400 for all my wood cutting. Geeez, If I only knew about a 5200 back then.. Right tool for the job. So much easier.
View attachment 1031127
It looks like a different saw with the good bar on it . But I get wanting to save it . Nice combo.Just wanted to show couple pics that I wasn't slackin off, and did finish the job. lol Sharpened the chain but didn't cut good at all. So went and put my 30" Poulan bar back on and used that. Been using a cheaper 28" Forester bar last couple years, to save the better one some. Was thinking on one of my many rest breaks, how for 20 years I used nothing but a Poulan 3400 for all my wood cutting. Geeez, If I only knew about a 5200 back then.. Right tool for the job. So much easier.
View attachment 1031122
View attachment 1031127
Gregg,
We moved about 2 months ago. Between unpacking, work, kids and other jobs in and outside the house I’m finally getting around to some tree work. I’m cleaning the edge of the lawn that goes deeper into our woods. Mostly small stuff, plenty of big stuff to clean deeper in, plan on making some trails. I broke out my 3450 type 3 today. Definitely a top 5 saw for me. 
75jeff
ArboristSite Lurker
If the coil ran the 3.7 parts saw, then yes it will fit & work. Most 530039093 coils are branded Phelon.
They’re also cheap & available from fleabay right now, but likely will be double the price next year, lol!
As will everything.
A quick giggle search on my coil showes it fits a range of saws from Homelite XL, SXL to Pioneer Farmsaw. Just found that interesting.
Just a question 
What is your warm up ritual for the saw???
I start the saw and keep touching the fins until I can't keep it there then I start working the trigger for a minute or two and it's time to get cutting.
Should be interesting to get some different ideas.
What is your warm up ritual for the saw???
I start the saw and keep touching the fins until I can't keep it there then I start working the trigger for a minute or two and it's time to get cutting.
Should be interesting to get some different ideas.
Nice find Gary.
Similar threads
