Want to Sell NOS clutch drums for various saws, pics inside

[nstueve]

2x Oregon 68208: XL-12,

• For OLDER HOMELITE Chainsaw Models XL12 PRIOR TO s/n 1735838
• Homelite Model C-52, Pro BD-10, perhaps others overlooked
• Remington Chainsaw Models PL-4, PL-5, PL-A.

Believe if it fits the C-52 it will also fit the following due to same chassis.

C-7

C-7-G

C-71

C-71G

C-72

C-5

C-5-G

C-51

C-51G

15x Oregon 29888

 

[nstueve]

2x Oregon 106906x

1x Oregon 38073

 

[nstueve]

4x McCulloch 65370?

 

[heimannm]

I am 99% certain that the "Speed Mac" drum pictured above fits the large frame saws, D-44 through SP125. 7 tooth, .404 pitch, need a bearing pressed in so don't throw your old drum away until you press the bearing out.

I will try to remember and look in the attic tonight to see if I have any that match those numbers. I recently bought several from e-bay but the came with the bearing and have a different number on the box.

Mark

 

[nstueve]

I am 99% certain that the "Speed Mac" drum pictured above fits the large frame saws, D-44 through SP125. 7 tooth, .404 pitch, need a bearing pressed in so don't throw your old drum away until you press the bearing out.

I will try to remember and look in the attic tonight to see if I have any that match those numbers. I recently bought several from e-bay but the came with the bearing and have a different number on the box.

Mark

I have 3 of the above clutch drum and think the spacers and bearings are in the box they came from. You have have a look at the Iowa Charity cut or I might bring them your way if I have business up your direction. I might have a test in Waterloo on Thursday...

 

[nstueve]

Bump edit to quantities and information above. I've been getting about $10ea out of these on evil bay + shipping so I'd be willing to sell any of them hand to hand for that at a WKY GTG or Iowa Fall GTG-CC