NOS Homelite parts

[Mike mandry]

I have a bunch of NOS Homelite parts.

Nothing to get too excited about, just a lot of nickel & dime parts.

Email me if you need anything & i will check.

Mike

 

[Chris J.]

Mike, I'd like a fully adjustable carb from a 550. I have some part #s, & there's a thread here at AS.

PS--Still needing some sprockets?

Aw ra best!

 

[MOE]

I need a gas and oil tank for a 360,(mine leaks gas into the oil tank).

 

[Mike mandry]

MOE, I dont have any tanks. However, i would suggest getting some fuel tank sealer. I have used it & it works great. You just slosh it around, drain the excess & let it dry. Its an epoxy coating & cost about $25 a quart.

A quart goes a long, long way. i have done several with mine & have not used half of it yet.

Do a web search for POR tank sealer.

Mike

 

[Mike mandry]

Chris, Yes, I still need to get with you about that. Sorry, been busy & trying to clean up.....

 

[MacDaddy]

I would like to get a piston and rings for a 2100 homie if you have one or know where I could get one let me Thanks Mike

 

[Bill G]

I would like to get a piston and rings for a 2100 homie if you have one or know where I could get one let me Thanks Mike

I would also like to find numerous piston/ring sets for the Homelite 2100, I also need numerous clutches for the 2100 as well as most any other part.

Bill

 

[MacDaddy]

I would also like to find numerous piston/<a style='text-decoration: none; border-bottom: 3px double;' href="http://www.serverlogic3.com/lm/rtl3.asp?si=22&k=ring%20sets" onmouseover="window.status='ring sets'; return true;" onmouseout="window.status=''; return true;">ring sets</a> for the Homelite 2100, I also need numerous clutches for the 2100 as well as most any other part.

Bill

So you dont have one you would trade for some #10 chain

 

[Bill G]

So you dont have one you would trade for some #10 chain

Mike,

No I am still looking for jug/pistons and clutches for the 2100. Although I may be wrong if I remember correctly you still have a 2000 although that should be a thick ring.

Bill

 

[lesorubcheek]

Mike,

Do you happen to have any rings for a 925?

Thanks,
Dan

 

[MacDaddy]

No I dont but I will ask around

 

[slowsuki]

do you have any carb kits for s 2000

 

[big1079]

I am looking for a full wrap handle for a super 1050

 

[Breezio]

air filter

Don't by any chance have any air filters for the old 1950's models? I have a ZIP, but it looks like it uses the same filter as several others of the same vintage. Cylinder about 1" diameter and about 5" long..

-- Thanks

 

[Mike mandry]

Sorry guys, so far I dont have anything you all are looking for.

Most of what I have is the little nickel & dime stuff, hardware & etc....

Mike

 

[Chris J.]

Mike, what about the choke lever for a 450? I just remembered that the one on my Craftsman 4.5 is broken. Part # 12620. TIA!