Metals406
Granfodder Runningsaw
We're waiting on the machinists to make our bottom mounts. I'm going to call them and see where we're at. They're also going to run some 066 thru as well.
I'll post back when I get off the phone with them.
Now taking pre-orders on 044,046,066 full wraps
- Thread starter Metals406
- Start date
Help Support Arborist Forum:
We're waiting on the machinists to make our bottom mounts. I'm going to call them and see where we're at. They're also going to run some 066 thru as well.
I'll post back when I get off the phone with them.
Metals406
Granfodder Runningsaw
Got off the phone with the machinists. . . They're thinking they can start Thursday. . . So we'd take delivery on them the following week.
Sounds like we'll be pounding out some handles soon.
Sounds like we'll be pounding out some handles soon.
adkranger
Addicted to ArboristSite
That's what we're aiming for as well.
We have interest in the larger Huskies, including the 394/395. Let me get a hold of Sam and see where he's at with his 394.
If it's not gonna happen with his, I'll PM you about yours.
OK, let me know. If it'll help the masses I'm willing to send it out for templating. This saw is yard sale pick that I've been just sitting on till I can find the time to go through it. It won't mind a little vacation in the Big Sky State.........though I will be mighty jealous.:hmm3grin2orange:
Metals406
Granfodder Runningsaw
I don't know, maybe the saw will take pity on you and come back home with beer? :hmm3grin2orange:
mcfly
ArboristSite Lurker
Got off the phone with the machinists. . . They're thinking they can start Thursday. . . So we'd take delivery on them the following week.
Sounds like we'll be pounding out some handles soon.
Great! Thanks for the update.
Metals406
Granfodder Runningsaw
Roll Call!!
Okay guys, we have two 044/046 mounts and two 066 mounts sitting at the shop.
But. . . Because we haven't come close to the minimum run for the bottom mounts, it drove up our costs (we may hit our spray min?). Doug told me that it would be $99 or no handle. I understand where he's coming from because we didn't hit our machinist min. on the mounts. . . But we also had said $80 shipped as an introductory offer (though, it was somewhat conditional on 20 orders coming in).
I'm going to work for nada on these ones and see if Doug will still do the $80.00. If not, I'll still figure out a way to get them out for that -- whatever it takes.
I need y'all to confirm the orders I have below before we move forward.
Rudedog: 044/440
Mcfly: 046/460
William G: 066/660 -- for an 064
Cliff: BH066/660 (big hands)
Adkranger: 372, 066/660 (for an 064)
Parrisw: 372
JJ: 372
supercabs78: 046/460
supercabs78, Cliff, I also need you to email me your info again, as I lost some PM's when my computer crashed. If you originally sent me a PM. . . Please email me. . . If you can't remember, email me anyway -- duplicate info means I have it for sure.
By my count, that's 10 handles. If I'm missing someone, please re-email me your info. . . Don't send me a PM. It also helps to include your username with your real name and info.
Okay guys, we have two 044/046 mounts and two 066 mounts sitting at the shop.
But. . . Because we haven't come close to the minimum run for the bottom mounts, it drove up our costs (we may hit our spray min?). Doug told me that it would be $99 or no handle. I understand where he's coming from because we didn't hit our machinist min. on the mounts. . . But we also had said $80 shipped as an introductory offer (though, it was somewhat conditional on 20 orders coming in).
I'm going to work for nada on these ones and see if Doug will still do the $80.00. If not, I'll still figure out a way to get them out for that -- whatever it takes.
I need y'all to confirm the orders I have below before we move forward.
Rudedog: 044/440
Mcfly: 046/460
William G: 066/660 -- for an 064
Cliff: BH066/660 (big hands
)Adkranger: 372, 066/660 (for an 064)
Parrisw: 372
JJ: 372
supercabs78: 046/460
supercabs78, Cliff, I also need you to email me your info again, as I lost some PM's when my computer crashed. If you originally sent me a PM. . . Please email me. . . If you can't remember, email me anyway -- duplicate info means I have it for sure.
By my count, that's 10 handles. If I'm missing someone, please re-email me your info. . . Don't send me a PM. It also helps to include your username with your real name and info.
Last edited:
mcfly
ArboristSite Lurker
I'm still good for it. Even at 99 I'm still good for it. Thanks for your hard work on this!
Metals406
Granfodder Runningsaw
Got your email Cliff. . .
We're now down to 9, as TFE sold his 046.
We're now down to 9, as TFE sold his 046.
Metals406
Granfodder Runningsaw
Work Saw Collector
GTG Coffee Maker
Roll Call!!
Okay guys, we have two 044/046 mounts and two 066 mounts sitting at the shop.
But. . . Because we haven't come close to the minimum run for the bottom mounts, it drove up our costs (we may hit our spray min?). Doug told me that it would be $99 or no handle. I understand where he's coming from because we didn't hit our machinist min. on the mounts. . . But we also had said $80 shipped as an introductory offer (though, it was somewhat conditional on 20 orders coming in).
I'm going to work for nada on these ones and see if Doug will still do the $80.00. If not, I'll still figure out a way to get them out for that -- whatever it takes.
I need y'all to confirm the orders I have below before we move forward.
Rudedog: 044/440
Mcfly: 046/460
William G: 066/660 -- for an 064
Cliff: BH066/660 (big hands
Adkranger: 372, 066/660 (for an 064)
Parrisw: 372
JJ: 372
supercabs78: 046/460
supercabs78, Cliff, I also need you to email me your info again, as I lost some PM's when my computer crashed. If you originally sent me a PM. . . Please email me. . . If you can't remember, email me anyway -- duplicate info means I have it for sure.
By my count, that's 10 handles. If I'm missing someone, please re-email me your info. . . Don't send me a PM. It also helps to include your username with your real name and info.
I'm still in for the 046/MS460. Email and PM on the way.
Last edited:
Metals406
Granfodder Runningsaw
We're gonna start making this run the end of this week or beginning of next.
What saws are you wanting done?
1 for a 372, 1 poss. 2 for 046/460
parrisw
Tree Freak
Sounds good Nate. I'm still down for 1 for a 372, I wish I had an extra few bucks, and I'd get a second one as well. I'll see what I can do. Thanks for the hard work. It sucks that these orders are moving slow for you guys, I thought they be moving faster. Have you tried to sell elsewhere then just here on AS?
I am confirmed and ready to send payment.
adkranger
Addicted to ArboristSite
Well crap. Can't believe you didn't get more movement on these Nate. I am committed for my order and stand by it. I understand your Boss' caution, these are tough times to be sticking your neck out.....
I too thank you for the effort and look forward to getting my hands your work.
I too thank you for the effort and look forward to getting my hands your work.
Work Saw Collector
GTG Coffee Maker
I'll second all that, and I can't wait to run it with the full wrap.
Well in that case I'll take one for my 660 too. Email sent.
Metals406
Granfodder Runningsaw
Just here on AS Will. . . We don't want to bite off too much to chew right off the bat. I figured we'd get an easy 20 here, and run with the first order. I imagine word of mouth would do some down the road as well.
Metals406
Granfodder Runningsaw
Roll Call!!
Okay guys, we have two 044/046 mounts and two 066 mounts sitting at the shop.
But. . . Because we haven't come close to the minimum run for the bottom mounts, it drove up our costs (we may hit our spray min?). Doug told me that it would be $99 or no handle. I understand where he's coming from because we didn't hit our machinist min. on the mounts. . . But we also had said $80 shipped as an introductory offer (though, it was somewhat conditional on 20 orders coming in).
I'm going to work for nada on these ones and see if Doug will still do the $80.00. If not, I'll still figure out a way to get them out for that -- whatever it takes.
I need y'all to confirm the orders I have below before we move forward.
Rudedog: 044/440 + 066/660
Mcfly: 046/460
William G: 066/660 -- for an 064
Cliff: BH066/660 (big hands
Adkranger: 372, 066/660 (for an 064)
Parrisw: 372
JJ: 372
supercabs78: 046/460
supercabs78, Cliff, I also need you to email me your info again, as I lost some PM's when my computer crashed. If you originally sent me a PM. . . Please email me. . . If you can't remember, email me anyway -- duplicate info means I have it for sure.
By my count, that's 10 handles. If I'm missing someone, please re-email me your info. . . Don't send me a PM. It also helps to include your username with your real name and info.
Alright! Scoreboard is up to 10 again.
