workshop
Addicted to ArboristSite
When and where is the next charity cut?opcorn:
Working on it.
Oklahoma,AR,MO,KS,TX GTG (Next GTG 08/27/2016 ) Fort Scott, KS
- Thread starter Work Saw Collector
- Start date
Help Support Arborist Forum:
Working on it.
cobey
Addicted to ArboristSite
sweet!!! I need more poop out of one of mine..... for a work saw only for pulling a bigger barOn a happier note - I did find out that the 9010 is on the bench at Randy's getting more bananas installed as we speak!
Hedgerow
HACK
Funeral was a good one...
I may move to Douglas Co...
It's incredibly rural...
Oliver1655
Addicted to ArboristSite
Morning Folks!
Thomas, here are some photos of the lift:
It has a 68 hp Wisconsin gas engine & is set up to run on propane. Well if i had the propane bottles it could.
Has a 51' 4" reach out from the turret horizontally.
Looking down, the platform floor is 62' in the air with the lift at a 75° angle.
A couple of aerial shots.
For perspective, the roof on the left is about 26' tall & the roof in the middle is 20' tall. That is mulberry on the trailer, the "other" yellow wood for heating.
Thomas, here are some photos of the lift:
It has a 68 hp Wisconsin gas engine & is set up to run on propane. Well if i had the propane bottles it could.
Has a 51' 4" reach out from the turret horizontally.
Looking down, the platform floor is 62' in the air with the lift at a 75° angle.
A couple of aerial shots.
For perspective, the roof on the left is about 26' tall & the roof in the middle is 20' tall. That is mulberry on the trailer, the "other" yellow wood for heating.
Homelite410
Hack with a CNC Mill
- Joined
- Mar 9, 2010
- Messages
- 5,210
- Reaction score
- 9,096
Good morning chainsaw freaks! Nice lift john, its a beautiful 50° here in the heartland and not a cloud to be found! Y'all have a good day!
On the hunt for some 5mm plug wire for the Homie 2000. Why didn't they use 7mm like everyone else? !!! Pot likers!
Maybe off a weed wacker.
Maybe off a weed wacker.
Morning Folks!
Thomas, here are some photos of the lift:
View attachment 366974
View attachment 366975
It has a 68 hp Wisconsin gas engine & is set up to run on propane. Well if i had the propane bottles it could.
View attachment 366976
Has a 51' 4" reach out from the turret horizontally.
View attachment 366977
Looking down, the platform floor is 62' in the air with the lift at a 75° angle.
View attachment 366978
A couple of aerial shots.
View attachment 366979
For perspective, the roof on the left is about 26' tall & the roof in the middle is 20' tall. That is mulberry on the trailer, the "other" yellow wood for heating.
We had one at the wire rope plant in Joetown. Was a Snorkle brand IIRC. Was very handy for our service dept. to do electrical, plumbing and overhead crane work.
I need to move to MO so I can borrow your lift and Matt's truck....and Matt can borrow my saws
Hedgerow
HACK
Ha!!!!I need to move to MO so I can borrow your lift and Matt's truck....and Matt can borrow my saws
On that note...
Just got the 7900 mutt back from Mike..
That thing has some serious anger issues...
5 cube play saw...
cobey
Addicted to ArboristSite
Going to a poopy wedding today. ................ yay. it was 106 in my little shed yesterday I got half a chain sharpened .... too hot in there need a little fan in it
it was 106 in my little shed yesterday I got half a chain sharpened .... too hot in there need a little fan in it
Locust Cutter
Sawing for Sanity
How does it compare to your 372's generally anti-social behavior?
Hedgerow
HACK
It's faster than the Dolkita, but not sure beyond that... More testing needs done, but I got no opportunity to really do it right... Hopefully by sometime next week...
Been raining 015L's here.
Albert picked his up. It needed the muffler reattached and I sharpened the chain. He has turned the edge of the bar blue from leanin' on it.
And, John dropped his off. Pull rope hangin' out, recoil cover screws MIA and filthy as sin. Hasn't run in two years. It's cleaned up and pops on a prime. Trying to avoid messin' with the carb. or replacing the fuel line.
Albert picked his up. It needed the muffler reattached and I sharpened the chain. He has turned the edge of the bar blue from leanin' on it.
And, John dropped his off. Pull rope hangin' out, recoil cover screws MIA and filthy as sin. Hasn't run in two years. It's cleaned up and pops on a prime. Trying to avoid messin' with the carb. or replacing the fuel line.
I need to try one; I never hear anyone bad mouthing Dolkita. There is a 5100 in the trading post i wouldn't mind having.
Got John's 015L running at 11 last nite. Violated my noise curfew a bit and Blondie voiced her disapproval. The kill switch not working didn't help the situation. Carried him to the front yard as there are no neighbors on that side of the house.
Now it's 5 am and had my coffee and cigs. so back to bed. Geezer bladder wakes us up after four hours of sleep.
Come on 8 am so we can run the pee-pee out of this pup.
Now it's 5 am and had my coffee and cigs. so back to bed. Geezer bladder wakes us up after four hours of sleep.
Come on 8 am so we can run the pee-pee out of this pup.
Homelite410
Hack with a CNC Mill
- Joined
- Mar 9, 2010
- Messages
- 5,210
- Reaction score
- 9,096
I had a 5100 loved it until I met my 350 known as squeak.
WKEND LUMBERJAK
Addicted to ArboristSite
Just a play saw No worky.
Mike that's like comparing A chevy 305 to a 327. Just saying
WKEND LUMBERJAK
Addicted to ArboristSite
Good morning Jim ,Carl, John's ,Matt, Steve's ,Coby, Eric, Mike, Chad, Brian.
