Oklahoma,AR,MO,KS,TX GTG (Next GTG 08/27/2016 ) Fort Scott, KS

[Hedgerow]

A shelf....[emoji41] [emoji104]

Thought about that Mike...
But this thing should be a runner..
This is a "no shelf queen" zone...

 

[Mo. Jim]

Morning all, heading out to cut another load of dead elm as soon as I finish unloading the truck. It's supposed to turn off cold next week, and I'm behind the curve on dry wood.

 

[cobey]

no saw stuff today... the toilet in the back bathroom is loose........ I hate fixing poopers

 

[Homelite410]

Morning all, heading out to cut another load of dead elm as soon as I finish unloading the truck. It's supposed to turn off cold next week, and I'm behind the curve on dry wood.

Want me come help you jim?

 

[67L36Driver]

Want me come help you jim?

The site for the next 'charity cut' can be around Halls, Mo..
A minnie cut.

I can maybe run Jim's splitter. As long as my hemroids hold out (in!).

 

[Homelite410]

The site for the next 'charity cut' can be around Halls, Mo..
A minnie cut.

I can maybe run Jim's splitter. As long as my hemroids hold out (in!).

Eeeeeewwwwwwww......

 

[awol]

no saw stuff today... the toilet in the back bathroom is loose........ I hate fixing poopers

Try a firecracker, they work real good!!

 

[Homelite410]

Try a firecracker, they work real good!!

I have been laughing about that Alan ever since you told me!!!

 

[67L36Driver]

Got an air filter for the Hooskie Barney 65 this am. Now we can at least run it in some wood.

Now where did that bar get to?

 

[workshop]

Matt, I'll pull all the pl4 ignition for you. I can relay it to you Monday.

 

[Hedgerow]

Matt, I'll pull all the pl4 ignition for you. I can relay it to you Monday.

I sharpened the pawls in the recoil.. Can't remember if that was a must? Or a no no??
Haha!!

 

[cobey]

Try a firecracker, they work real good!!

i think that would be counter productive for me Alan got the floor fixed and pipes fixed, got to rebuild the toilet and set it

then i can finish a guys saw

 

[cobey]

I sharpened the panels in the recoil.. Can't remember if that was a must? Or a no no??
Haha!!

I got a pl4 that runs good.. too bad it isnt green

 

[67L36Driver]

I sharpened the pawls in the recoil.. Can't remember if that was a must? Or a no no??
Haha!!

Sharpen at a 45 deg. angle but do not make them shorter. Don't go bending in them.

For better engagement, prick punch inside the cup every 1/16-3/32 inch.

No oil on friction washers (two!). Spring in place under the large washer. Shim it if you have room under the 'E' clip.

 

[sawnami]

I got a pl4 that runs good.. too bad it isnt green

Sent from my SM-N910V

 

[sawnami]

Sent from my SM-N910V

Sent from my SM-N910V

 

[sawnami]

Sent from my SM-N910V

Sent from my SM-N910V

 

[67L36Driver]

Yup. Green and yellow Remington's run like a deer and are worth a lot more.

 

[Hedgerow]

Sharpen at a 45 deg. angle but do not make them shorter. Don't go bending in them.

For better engagement, prick punch inside the cup every 1/16-3/32 inch.

No oil on friction washers (two!). Spring in place under the large washer. Shim it if you have room under the 'E' clip.

Sounds like what I did..
Cept I dimpled with a file end maybe 1/4" apart..
That really is a dumb design... Not thought out well at all..
Or.. It worked really well when it was new...

 

[Oliver1655]

Green paint is good but when the air cleaner cover has "Powerline" in raised letters, ....