Oklahoma,AR,MO,KS,TX GTG (Next GTG 08/27/2016 ) Fort Scott, KS

[cobey]

You need this!

im kinda fat now, i can use the workout

 

[67L36Driver]

Morning midlanders!

Get the cylinder swapped on the McCinderblock Steve?

 

[WKEND LUMBERJAK]

Good morning Carl

 

[workshop]

Morning midlanders!

Get the cylinder swapped on the McCinderblock Steve?

Not yet. Been weighing my options. I think I'm going to send it to Jeepsnchainsaws and let him repair the spark plug threads the best way that he see's fit. Have to wait on funds to break loose first.

 

[Homelite410]

 

[67L36Driver]

Not yet. Been weighing my options. I think I'm going to send it to Jeepsnchainsaws and let him repair the spark plug threads the best way that he see's fit. Have to wait on funds to break loose first.

A special insert, say 3/4"-16 tpi on the OD and 14mm ID with a flange would do it. A pair of notchs in the flange for a spanner wrench. Turn it in with red Loctite.

 

[sawnami]

A special insert, say 3/4"-16 tpi on the OD and 14mm ID with a flange would do it. A pair of notchs in the flange for a spanner wrench. Turn it in with red Loctite.

This works well for me.

Sent from my SM-N910V

 

[67L36Driver]

This works well for me.

Sent from my SM-N910V

That's already been tried on the Cinderblock, twice. Now is time to go bigger or replace the cylinder.
PO reported it was a good saw before it shot the plug across the yard.

 

[Jeepsnchainsaws]

It's 2015

 

[WKEND LUMBERJAK]

Good morning all

 

[67L36Driver]

Morning Kenneth! And, fellow midlanders!

 

[workshop]

That's already been tried on the Cinderblock, twice. Now is time to go bigger or replace the cylinder.
PO reported it was a good saw before it shot the plug across the yard.

Hoping Adam will be able to weld up the plug hole and rethread. I'd like to save this cylinder.

 

[67L36Driver]

Hoping Adam will be able to weld up the plug hole and rethread. I'd like to save this cylinder.

The cylinder in the laundry basket any count?

 

[workshop]

The cylinder in the laundry basket any count?

Yeah, I think that one is ok, but it's a regular 610 cylinder. 650 and 655 have the compression release. That's why I'd like to save that cylinder. I've got another 650, but it's still a viable saw. Trying not to use it for spare parts.

 

[Jeepsnchainsaws]

Yeah, I think that one is ok, but it's a regular 610 cylinder. 650 and 655 have the compression release. That's why I'd like to save that cylinder. I've got another 650, but it's still a viable saw. Trying not to use it for spare parts.

No worries, we can save it

 

[cobey]

hey all

 

[67L36Driver]

New fuel pump on the vet. Bent up a new hard line from pump to carb.
Air filter base clears the hard line. Hoo Rah!
Took most of the day. Geezer moves slow. Bum left shoulder is not helping the progress.

And, I pruned momma's roses.

Got rings for Echo. Play saws later.

 

[WKEND LUMBERJAK]

Turned out to be a nice day.

 

[SteveSS]

Yessir! I'm in SE Kansas for the week, and it was mid-70's here today. Rolled down the windows and took a drive for a while when I was done with today's job site.

 

[workshop]

Yep, real nice day.
Postman left a box on the porch. Had a little Homelite Super EZ in it. Not bad shape either. As a matter of fact, pretty nice.
Thanks SteveSS.