cobey
Addicted to ArboristSite
Hi fellas! Started this today.....
Is that a Dolmar muffler?
Oklahoma,AR,MO,KS,TX GTG (Next GTG 08/27/2016 ) Fort Scott, KS
- Thread starter Work Saw Collector
- Start date
Help Support Arborist Forum:
Is that a Dolmar muffler?
Homelite410
Hack with a CNC Mill
- Joined
- Mar 9, 2010
- Messages
- 5,210
- Reaction score
- 9,096
361 squeal!
workshop
Addicted to ArboristSite
. 
. 
cobey
Addicted to ArboristSite
I didn't know they were that restrictive, i have ran a couple that ran good
Homelite410
Hack with a CNC Mill
- Joined
- Mar 9, 2010
- Messages
- 5,210
- Reaction score
- 9,096
Hedgerow
HACK
Ok.. So I may grind on one once in a while...
And stuff...
This dude should run a 24" bar real well... @60cc
Scott Kelly
Silverpsd_06
What's up with the left hand side?
Hedgerow
HACK
Scott Kelly
Silverpsd_06
Ancient porting secret from sumting-wong..
The big bore MS650 and MS460 are dead in the water 'till the parts come out of the pipeline.
Meantime I have the new piston for the John Deere 80EVA Echo on hand. Hopefully all his parts are in the box he came in.[emoji19]
Meantime I have the new piston for the John Deere 80EVA Echo on hand. Hopefully all his parts are in the box he came in.[emoji19]
Morning midlanders!
WKEND LUMBERJAK
Addicted to ArboristSite
Morning Carl looks like summer is around the corner
SteveSS
Addicted to ArboristSite
Morning folks. Still overcast and gloomy in the Volunteer State.
SteveSS
Addicted to ArboristSite
Found a Home Depot yesterday that has two Makita 6421's that the store tech can't make run. I offered to buy them, but have to wait for a manager to give approval tomorrow. Something positive might come out of this trip yet...
Sadly no Makita 6421's for rent or disposal at the one in north Joetown.[emoji45]
Downpour this am. Set in for all day from the looks of it.
High winds with this storm. Took large limb out of oak on Mitchel Ave ten blocks over blocking the street.
The tree service guys will be busy.
The tree service guys will be busy.
Heh! When you get a pile of 1128 (440/460) parts mixed up with 1122 (066/660) parts you can come up with all sorts of combinations that don't work.
The 660 type air filter adaptor I was missing I found it on the 460.[emoji21] Now I have the wrong one on order.
The 660 type air filter adaptor I was missing I found it on the 460.[emoji21] Now I have the wrong one on order.
Borrowed the starter off the 440 and got the 460 running. Pre-set on the carb was near spot on. Oil pump needs turned down.
With the 1/16" bleed hole in the comp release you can shut it down by just pushing it in. Hole prolly too big.
With the 1/16" bleed hole in the comp release you can shut it down by just pushing it in. Hole prolly too big.
SteveSS
Addicted to ArboristSite
Went out and did a little exploring today and made my way to Lynchburg to the Jack Daniel distillery. It was a really cool tour. My son turns 21 in October this year so I bought him a liter of Single Barrel and had the bottle custom engraved to celebrate the occasion.
