Oklahoma,AR,MO,KS,TX GTG (Next GTG 08/27/2016 ) Fort Scott, KS

[WKEND LUMBERJAK]

Which product? Scott

 

[Scott Kelly]

I used motoseal on the outside metal part of the seal. Its permatex's version of yamabond. The saw is a stihl 026

 

[WKEND LUMBERJAK]

I think yama bond 12 hours. Let me look when I get home.

 

[WKEND LUMBERJAK]

Well I was of by 11 hours and 40 minutes it say 20 minutes.

 

[67L36Driver]

I tried to pressure test my little 026 before I left for work.. Is there any set time for motoseal to work? Approximately how long should it hold pressure/vacuum for? Right now it drops ever so slowly but it is dropping..

IMO, drop slowly is good to go. After all, the seals are single lip.

 

[Scott Kelly]

By drop slowly probably every 20 seconds or so its losing a pound of air or so but it was also pumped up to 10psi

 

[WKEND LUMBERJAK]

By drop slowly probably every 20 seconds or so its losing a pound of air or so but it was also pumped up to 10psi

That should be fine. Think about it in terms of how may times the piston moves in a second when it runs.

 

[Hinerman]

Just have to see all those husky's and Dolmars on race day in Ft Scott..

When is Ft. Scott? September what???

 

[cobey]

When is Ft. Scott? September what???

27th ...... ish

 

[Scott Kelly]

It's a vast improvement over the first pressure test attempt... Couldn't pump the mityvac fast enough to build any semblance of pressure

 

[lumberjackchef]

When is Ft. Scott? September what???

The gtg will on the Saturday 26th. It is being held at the pioneer harvest fiesta which starts on Friday and ends Sunday. There is camping and rv slots with electric on site. Think its 10$ to the club for usage.

 

[cobey]

Oops the 26th

 

[67L36Driver]

Morning midlanders!

 

[WKEND LUMBERJAK]

Morning Carl .everome have a great summer day.

 

[sawnami]

I tried to pressure test my little 026 before I left for work.. Is there any set time for motoseal to work? Approximately how long should it hold pressure/vacuum for? Right now it drops ever so slowly but it is dropping..

Per Husky :

Sent from my SM-N910V

 

[Scott Kelly]

Morning fellas, tested the new seals with soapy water.. No leaks! I'm leaning more towards the homemade rubber gaskets not sealing correctly to be my cause. Hopefully I'll find time to stick it together soon

 

[SteveSS]

Morning gents. It's looking like a beautiful day out there. Enjoy it.

 

[sawnami]

[emoji4]

Sent from my SM-N910V

 

[Hedgerow]

What are you electrocuting Steve?

 

[Homelite410]

Time to play in the dirt at Alan's now!!!