Oklahoma,AR,MO,KS,TX GTG (Next GTG 08/27/2016 ) Fort Scott, KS

[67L36Driver]

No worries about my daughter. She carries a gun and a badge.

When she turned 21, I gave her a Smith Air Weight. Peed Blondie off!!!!

 

[workshop]

I don't worry about my daughter. She used to be an MP in the Army Reserve. She took down a guy that was a foot taller than her and out weighed her by 100 lbs. Planted his face in the dirt.

 

[workshop]

I don't worry about my daughter. She used to be an MP in the Army Reserve. She took down a guy that was a foot taller than her and out weighed her by 100 lbs. Planted his face in the dirt.

She likes the Beretta 9mm and the baton. Absolutely hates the M16.

 

[67L36Driver]

M16. Gods terrible swift sword. Carried one for a year.

18 rounds in the twenty round mag. Better feed reliability on reload. But it has been changed some since.

 

[workshop]

She was the roof gunner in a Humvee. She does like an M60.

 

[67L36Driver]

Big Hoosky starts on choke instead of priming it. Kill switch works instead of yanking the plug wire off. Oils the chain but we have darkness and a frog strangler going so no test cut.

A Stihl comp release works in it if you drill the tiny hole to 1/16". Original hole is 3/32".

Relieved the top cover where it was hanging up (made the hole bigger.).

This thing took a hit at the seam between the top cover and the recoil starter which put some things out of wack. Back in wack now.[emoji12]

 

[Scott Kelly]

Got one 026 running now on to the ms260. Every time I take one apart I tell myself I won't lose any parts, lost the manifold. Of course, steal one off the 260, eat dinner, walk back down and the missing piece magically appears...

 

[Homelite410]

My goodness its raining now.....

 

[Homelite410]

Big Hoosky starts on choke instead of priming it. Kill switch works instead of yanking the plug wire off. Oils the chain but we have darkness and a frog strangler going so no test cut.

A Srihl comp release works in it if you drill the tiny hole to 1/16". Original hole is 3/32".

Relieved the top cover where it was hanging up (made the hole bigger.).

This thing took a hit at the seam between the top cover and the recoil starter which put some things out of wack. Back in wack now.[emoji12]

How much Carl?

 

[67L36Driver]

How much Carl?

Still undergoing evaluation. We may be in the mood to put in a piston/rings. Mostly the thing swallowed a lot of dirt. The 32:1 not doing it any harm for sure.

What is the difference between 394 and 395? Builder plate is no help. Illegible.

 

[Scott Kelly]

Starting on this ole hog she is filthy, run hard and put away wet. We'll see if we can make her shine by the end of it. New piston and rings for sure, ill post pics of the cylinder shortly.

 

[SteveSS]

Morning gents. Plumber scheduled to arrive in an hour. Hopefully he'll have all of my drains flowing freely before shower time. It's no fun when your morning shower turns into a bath.

Have a good one.

 

[67L36Driver]

Morning Steve!

Morning midlanders!

Here is the Hoosky air filter after a bath in hot water and dish soap.

It didn't fall apart. Not dry yet tho.

 

[Scott Kelly]

Good morning fellas! A few more shots of the project, cylinder looks to be in decent enough shape, no transfer or scoring. Piston has seen better days but is suffering from pinched rings.

A good cleaning and some porting with new piston and rings on the way!

 

[67L36Driver]

The piston & cylinder kit from Chainsaw Conservation Components I used was 52 bux.
If your cylinder won't clean up.

 

[Hedgerow]

Got a husky 61 on the bench..
It's no longer an open port 61..

 

[Hedgerow]

Oh, and Carl...
The 394 is dual port and the 395 is a quad port IIRC..

 

[bigtuna]

That's what I'm working on matt, 61-272 conv. Using cheap
A$$ nickacil p/c. Waiting on 2 pc. Coil. Found a very clean case, couldn't resist

 

[SteveSS]

Main line is clear out to the street. No more ankle deep showers. The gray line basement drains wouldn't clear in 100 feet of the rooter. Not real sure what my options are now. Guess I could have a better idea if'n I knew where it left out at.

 

[Hedgerow]

That's what I'm working on matt, 61-272 conv. Using cheap
A$$ nickacil p/c. Waiting on 2 pc. Coil. Found a very clean case, couldn't resist

Lol...