Oklahoma,AR,MO,KS,TX GTG (Next GTG 08/27/2016 ) Fort Scott, KS

[Stumpys Customs]

Sup fellers,:msp_wub:

Got cookie Monsters MS170 muffler modded & tuned up. He's a very happy cutter. Picked me up a couple of new saws from my Grandpaw, a Dolmar 112 (no comp:frown and a Homie xl with the smallest bar I ever seen. Aint measured it yet but it's only about 8" or 9" total length. :hmm3grin2orange:

Hope everybody is over thier sickness & feelin better. Can't wait fer the next GTG.

 

[sawnami]

Sup fellers,:msp_wub:

Got cookie Monsters MS170 muffler modded & tuned up. He's a very happy cutter.

How many gallon of mix has he gone through by now? I'd be willing to bet a bunch.:chainsawguy:

Cut firewood this morning. The 2071 is getting jealous of the Olympyk. The Sunoco 110 in the Olympyk seems to work really well.

 

[atvguns]

Sup fellers,:msp_wub:

Got cookie Monsters MS170 muffler modded & tuned up. He's a very happy cutter. Picked me up a couple of new saws from my Grandpaw, a Dolmar 112 (no comp:frown and a Homie xl with the smallest bar I ever seen. Aint measured it yet but it's only about 8" or 9" total length. :hmm3grin2orange:

Hope everybody is over thier sickness & feelin better. Can't wait fer the next GTG.

if you could find a market for all those cookies he cuts you would be rich in a hurry

 

[RVALUE]

Sup fellers,:msp_wub:

Got cookie Monsters MS170 muffler modded & tuned up. He's a very happy cutter. Picked me up a couple of new saws from my Grandpaw, a Dolmar 112 (no comp:frown and a Homie xl with the smallest bar I ever seen. Aint measured it yet but it's only about 8" or 9" total length. :hmm3grin2orange:

Hope everybody is over thier sickness & feelin better. Can't wait fer the next GTG.

Short bar? Not hard for me to imagine. Can you still reach the ground without bending over? Should work fine.

 

[Echo Kid]

A few parts can apparently still be ordered by Dolmar dealers. I ordered an air filter for a 112 last week from a local dealer that swears he can still get them. And there is Feebay.
What parts are you looking for?

a gasket set, piston ring,crankshaft bearing

 

[WKEND LUMBERJAK]

Late Summer GTG

I spoke to some at WSC GTG to get a feeling for a GTG coinciding with a Local Dealers (Bishop's in Perry Ks) Wood Chip Days. Those that i spoke with thought it would be a good idea. Well I went by there last week to get some odds and ends. Joel Bishop said they were going to have their Wood Chip Day August 20th coinciding with Perry Days. Bishops will have all there dealer reps present along with wood to cut. They will have all the new saws that they let people try. It sounded like they were going to have saw racing. They will provide a place for us to display our saws. They will need help with the set up and wood that is where the local A.S. Guys come into play. Perry Lake is about 5 or 10 minutes with group camping or there are hotels about 20 minutes away.

The City is going to have venders and a Band. More details as it progresses. Does this sound like something everyone would be interested in? :msp_w00t:

Let me know..

Perrys ZIP Code 66073.

 

[atvguns]

One hr west of Kansas city might be doable

 

[sawnami]

That's the same weekend as the Ozarks Antique Auto Club Swap Meet that I'm a vendor at.:bang:

I really wanted to make that one.

 

[ARsawMechanic]

a gasket set, piston ring,crankshaft bearing

Well, I have seen "Dandrikop" on Ebay carries the ring. Haven't heard anything bad about him or his product.
Crank bearing & gasket set... I don't know, to be honest. There are several Dolmar dealers on AS. There is a Sachs Dolmar thread also, I know there is a dealer that posts in it alot, he seems knowledgable about them.
Got any local Dolmar dealers?

 

[ARsawMechanic]

Picked up a "passle" of saws today. 2 Mcculloch 601's, an old Echo that appears to be seized, a Stihl 028 av super with oiler gear issue, another Stihl that lost its badge, & I have no clue what it is, & the remains of a Husky 51, also seized.
So its official. I have gone to the dark side, & now own both Stihl & Husqvarna products. :hmm3grin2orange:
Funniest thing is that this guy was only about 10 miles down the road from where I picked up the JD. I'm starting to think I should print some "Buying old Chainsaw" flyers & hit every house on that road!
On another note, I got my 9 year old running a chainsaw for the first time today, & he just ate it up! He did a little trenching with it, but not too bad for a first timer.

 

[ARsawMechanic]

My bad! 2 Mcculloch 610's & an Echo 601. Too many 6's & 0's to keep up with.

 

[atvguns]

congrat's on the saw's sounds like CAD has deffinatly set in post some pics of that stihl maybe we can figure it out

 

[Work Saw Collector]

I spoke to some at WSC GTG to get a feeling for a GTG coinciding with a Local Dealers (Bishop's in Perry Ks) Wood Chip Days. Those that i spoke with thought it would be a good idea. Well I went by there last week to get some odds and ends. Joel Bishop said they were going to have their Wood Chip Day August 20th coinciding with Perry Days. Bishops will have all there dealer reps present along with wood to cut. They will have all the new saws that they let people try. It sounded like they were going to have saw racing. They will provide a place for us to display our saws. They will need help with the set up and wood that is where the local A.S. Guys come into play. Perry Lake is about 5 or 10 minutes with group camping or there are hotels about 20 minutes away.

The City is going to have venders and a Band. More details as it progresses. Does this sound like something everyone would be interested in? :msp_w00t:

Let me know..

Perrys ZIP Code 66073.

I'm interested.

 

[RVALUE]

My bad! 2 Mcculloch 610's & an Echo 601. Too many 6's & 0's to keep up with.

Is a 601 the same as a 610?

 

[RVALUE]

What's the status of our October 23 GTG in N. AR?

 

[Work Saw Collector]

another Stihl that lost its badge,

If you take the air filter off and look on the inside of it there will be a long part # just give me the first four #'s. I'll see if I can tell you what it is.

 

[Work Saw Collector]

What's the status of our October 23 GTG in N. AR?

I'm all in.

 

[RVALUE]

I used to have some stihls. Not a stihl on the place at the moment.

 

[Hedgerow]

I used to have some stihls. Not a stihl on the place at the moment.

Patience grasshopper....

 

[atvguns]

I used to have some stihls. Not a stihl on the place at the moment.

how do you expect to get any work done