Olympyk, Olympic, Oleo Mac, Emak, Efco, Blitz, Folux, Spartan, Spartacus thread

[brandonstc6]

Whats the poop on yer filter?

I took the new filter from a member here, which was wrong but close. I modified it to fit and saw and it's works good. I have some more filters that I am going to glue some felt on.


Sent from my iPhone using Tapatalk

 

[raumati01]

Does anyone here have any experience with oleo mac 962s? Got a project saw on its way.

 

[sawnami]

Does anyone here have any experience with oleo mac 962s? Got a project saw on its way.

I've got a 962. Very strong runner.

Sent from my SM-N910V using Tapatalk

 

[raumati01]

I've got a 962. Very strong runner.

Sent from my SM-N910V using Tapatalk

Good to know, have you modded it at all?

 

[sawnami]

Opened up the muffer a little.

Sent from my SM-T900 using Tapatalk

 

[67L36Driver]

Two sixty fours been multiplying on me.

Two need to go.

 

[jerrycmorrow]

Opened up the muffer a little.

Sent from my SM-T900 using Tapatalk

Howd you openthe muffler steve

 

[67L36Driver]

Cleaned up Oly 264 #3.

Chain catcher bent. Will invent a replacement.

I'm thinking a bolt with loose tubing sleeve.

 

[sawnami]

Howd you openthe muffler steve

This model has a block-off plate on the front of the muffler that can be removed.

Sent from my SM-T900 using Tapatalk

 

[ChipsFlyin]

Cleaned up Oly 264 #3.

Chain catcher bent. Will invent a replacement.

I'm thinking a bolt with loose tubing sleeve.

Here ya go:

I do not know the metric size of the threads so here are the pages.

Coupling nuts: One of these should be the correct size...

https://www.fastenal.com/products/f..."600076 Coupling Nuts"|~ ~|sattr01:^Metric$|~

Metric Bolts (pick your length in mm) and just search the diameter ie: M6,M7,M8,... and thread size.

https://www.fastenal.com/products?t... Screws 9and Hex Bolts"|~ ~|sattr02:^Steel$|~

 

[67L36Driver]

Yup, exactly what I had in mind to replace the original. ( Ace is the place!)

But, we have an opportunity to 'improve the breed' with a round rolly sleeve.[emoji848]

 

[ChipsFlyin]

Yup, exactly what I had in mind to replace the original. ( Ace is the place!)

But, we have an opportunity to 'improve the breed' with a round rolly sleeve.[emoji848]

You're going fancy!

 

[oakcutter]

Yes.....I love my Efcos!!

 

[brandonstc6]

I tried to start my olympic 251 and it has two problems. You have to tap on the pull start to get it to re-wind and I think I have an air leak. It idles too fast and it is slow to return to idle after full throttle


Sent from my iPhone using Tapatalk

 

[jerrycmorrow]

I tried to start my olympic 251 and it has two problems. You have to tap on the pull start to get it to re-wind and I think I have an air leak. It idles too fast and it is slow to return to idle after full throttle


Sent from my iPhone using Tapatalk

1. If your cord is too small it sometimes gets stuck.
OR
Perhaps your spring needs to be a turn or two tighter
OR
The plain bearing the pulley rides in could be worn out. If this is the case you may be sol
Encountered all three of these regarding stuck pulley
2. You may have a leak (im searching for one right now). If no leak, you can fatten the lo screw to help it return to idle. If you have a leak quit using it til fixed.
Good luck

 

[bama]

Here are some pics of the 950F Deluxe. Nice saw for what I paid for it. HArd to find parts for.

 

[fwgsaw]

just received my first Italian muscle saw a 999f. Was pleasantly surprised to find it was never used. I've seen several pictures of these over the years but this is the only one I've seen with a full wrap bar. Anyone seen a full wrap on a 999f before? Unfortunately the Dawgs were never installed and the original owner didn't know where they were at so I'm in the market for a set.

 

[Little Al]

Cleaned up Oly 264 #3.

Chain catcher bent. Will invent a replacement.

I'm thinking a bolt with loose tubing sleeve.

I cut the correct size allen had bolt to length & slid a piece of the plastic/nylon tube suitable for bushings on the bolt shank dab of locktite to keep it tight

 

[heimannm]

Nice saw Floyd - I think Olyman has a 999, not sure what handle it has or if he has a spike.

Mark

 

[fwgsaw]

Nice saw Floyd - I think Olyman has a 999, not sure what handle it has or if he has a spike.

Mark

Thanks Mark. I believe I've seen olymans 999 and it also has a half wrap. I need to find a set of h&s spikes for this monster