cliff-1972
ArboristSite Operative
Anyone know anything about this saw.Good or bad.
Opinions on a OLYMPYK 999
- Thread starter cliff-1972
- Start date
Help Support Arborist Forum:
John in MA
Addicted to ArboristSite
It's a good company, and that's about all I can say. Not too many of those big 999s in the US. I know Gypo and another guy on this board have owned/sold/used them.
Tony Snyder
Addicted to ArboristSite
We Olympyc (Efco) dealers cannot get them in the U.S., or at least not in the midwest. Wish we could.
cliff-1972
ArboristSite Operative
Thanks John for the reply.I was just looking at it.It is on E-bay right now.
kdhotsaw2
ArboristSite Member
999 oly
hello cliff,
How are you doing cliff. should be into your 371 by the first of next week. I had 2 of the 999 olympac's, really nice saws. the transfer's are already dropped out to the lower case and they come equipped with the ht-1 tillotson carb. it's a 6.1 cubic inch saw so is to big for the 6 cube class. the bottom end is very strong, about the size of a 3120 husky or 088 stihl. modified one and ran it in the over 6 cube class but couldn't quite beat the mac's and 3120's
ken
hello cliff,
How are you doing cliff. should be into your 371 by the first of next week. I had 2 of the 999 olympac's, really nice saws. the transfer's are already dropped out to the lower case and they come equipped with the ht-1 tillotson carb. it's a 6.1 cubic inch saw so is to big for the 6 cube class. the bottom end is very strong, about the size of a 3120 husky or 088 stihl. modified one and ran it in the over 6 cube class but couldn't quite beat the mac's and 3120's
ken
kdhotsaw2
ArboristSite Member
oly 999
heres a photo of the 999 before I sold it on ebay
ken
heres a photo of the 999 before I sold it on ebay
ken
cliff-1972
ArboristSite Operative
That's great,Ken.I look foward to recieving it when your done.I was looking at the 999 and some others to get for you to modify later on
