Oregon Roll-o-tronic bars

Madsaw · Feb 13, 2005

Just wanted to know if these have any vaule? Picked up a lot of bars and NOS husqvarna parts tonight.The Oregon bar is brand new some of the lettering is bad due to age. The numbers on the bar are 33363, 1658-0535. Also got a replacment roller tip for this bar also NOS. Just a quick look through things tonight showed some 1/4 sprockets. Is there much call for the 1/2 and 7/16 rim sprokets?. I may just list some sprockets and such on here. The guy even tossed in a set of parts manuals to for husky saws.
Later All
Bob

Stumper · Feb 13, 2005

Racers like them. Roller tips are fast and pitch doesn't matter but they suck for limbing-Twigs like to find the gap at the nose to derail the chain.

Bill G · Feb 13, 2005

Bob,

When you get a list of what you have let me know. I would be interested in the rolller tip bar as well as whatever else you have. By the way I never heard back from you about the old Merc.

Bill

Madsaw · Feb 13, 2005

Here is a couple of pics of the bar and extra tip. Looks to be about a 17 or 18 cut on it.
Bob

LJS · Feb 14, 2005

Bob....the tips are worth more than the bar. A minimum of $20 if there the big one's(2 7/8"). Put them on ebay and you should do better. Watchout for the cheapskate collectors! LJS

ray benson · Feb 14, 2005

Hi Dennis,
I PM'd Bob about the bars and roller tips value.The 2 7/8" are highly sought after by racers. What do think the value is of the other sizes of roller tips( 2 3/4",2 1/2")?
Ray

LJS · Feb 14, 2005

Hi Ray....the smaller tips are good for making short racing bars too, but not as highly sought after. I would say $10 to $20, but put on ebay you may do better. LJS