Pioneer Partner P39 thoughts

[Acornhill]

I few pics

Sent from my iPhone using Tapatalk

 

[Acornhill]

Sent from my iPhone using Tapatalk

 

[Dave Mccarthy]

Yes that looks like it would fit. Item 119 would be correct it seems.

 

[Acornhill]

yup, guy on ebay has some he cuts out of a material and sells for like $10, i have some originals but they are staying here.

 

[Acornhill]

those gas caps are like hens teeth in more than one way.

 

[Dave Mccarthy]

None on Ebay at the moment. I may have to make one from some paint booth air filter material at work. Thanks for your guys help, greatly appreciated!

 

[Dave Mccarthy]

Also, is Non-ethanol 91 octane, 50:1 (Husqvarna XP mix) the proper mixture for this saw?

 

[Little Al]

Oregon has a listing for a 16" bar, 168RNDD007 and a 20" bar, 208RNDD007. They are both 3/8" chain in .058 gauge., they also have a listing for a 20" bar with the cat number 208ATMD007. I suggest you call the closest Oregon dealer and see if these are still current bar numbers, I find Oregon is dropping bars for these older saws more often since they were bought out by Blout.

As said the bar mount was D007 chain 3/8 x 058 the mount patterns for other bars were Windsor PP & GB P it seems the 18" bar was produced from unobtainium there was a Canadian member that used to post on here that had a good supply of pioneer bits & pieces his avitar was aircraft related but sorry can't remember exactly what it was some one may remember

 

[Little Al]

Also, is Non-ethanol 91 octane, 50:1 (Husqvarna XP mix) the proper mixture for this saw?

Suggest you use 40 or 32/1 mix 87 or 91 Non E fuel is fine tune accordingly

 

[Dave Mccarthy]

Looks like I will have to thicken up the mix a bit Thanks!

Will this bar fit my saw?
https://www.ebay.ca/itm/POULAN-CHAI...382706?hash=item51ea7c8f72:g:AhAAAOSwgmJXyGZM

 

[pioneerguy600]

As said the bar mount was D007 chain 3/8 x 058 the mount patterns for other bars were Windsor PP & GB P it seems the 18" bar was produced from unobtainium there was a Canadian member that used to post on here that had a good supply of pioneer bits & pieces his avitar was aircraft related but sorry can't remember exactly what it was some one may remember

He has moved on and not on here since Nov 2017. He did have some parts left but was not interested in selling individual parts.

 

[Acornhill]

I tried to purchase his parts but he would not ship them to the USA


Sent from my iPhone using Tapatalk

 

[pioneerguy600]

I tried to purchase his parts but he would not ship them to the USA


Sent from my iPhone using Tapatalk

I bought a lot of stuff from him, didn`t try for the last lot as I am done building P series saws.

 

[Little Al]

yup, guy on ebay has some he cuts out of a material and sells for like $10, i have some originals but they are staying here.

Is that Kstuff 66 TA Anderson chainsaws

Looks like I will have to thicken up the mix a bit Thanks!

Will this bar fit my saw?
https://www.ebay.ca/itm/POULAN-CHAI...382706?hash=item51ea7c8f72:g:AhAAAOSwgmJXyGZM

Could well do if you can find the bar mount # if it corresponds to Oregon 007 or others then you're good to go

 

[Dave Mccarthy]

This is the bar I bought after. Hopefully it fits good.

https://www.ebay.ca/itm/NEW-Pioneer...e=STRK:MEBIDX:IT&_trksid=p2060353.m2749.l2649

 

[Dave Mccarthy]

Any idea what the max free rpm with a 20" bar would be?