I am just checking to see if anyone here might be interested in either one of these stock magnesium cased poulans before i list them on ebay in the future.
Poulan 3750 is 60cc with 22" B+C 3/8 full chisel chain, rebuilt carb, new fuel filter, new ring and base gasket, muffler modded-inside baffle removed and extra holes in front cover. The piston had light scoring on the exhaust side when i bought it (polished it up and reused piston with new ring) and the top plastic cover has a melted area above the muffler where the muffler was not put together right at one time. Magnesium metal case. The saw has no issues what so ever and runs real strong now. The saw even got a 5th place in stock saw racing behind 4 dolmar 6400's.
Poulan pro 305 is 49cc with a 18" B+C with .325 stihl RS chain, rebuilt carb, new fuel filter, muffler modded-inside baffle removed and extra holes in front cover. magnesium metal cased. The saw has no issues what so ever and runs real strong too.
If anyone is interest pm me for details or if you would like some pics of the saws, so i could go ahead and post them for you.
These saws need nothing but some 40-1 mix and bar oil. Ready to go. Both saws come with the inner dawgs, I dont use dawgs and removed them for my usage.
I have just got into modded saws so much now and use the stock saws less and less. Plus the herd is growing more then i need. The green one on the right 3750, front and center yellow one 305.
Poulan 3750 is 60cc with 22" B+C 3/8 full chisel chain, rebuilt carb, new fuel filter, new ring and base gasket, muffler modded-inside baffle removed and extra holes in front cover. The piston had light scoring on the exhaust side when i bought it (polished it up and reused piston with new ring) and the top plastic cover has a melted area above the muffler where the muffler was not put together right at one time. Magnesium metal case. The saw has no issues what so ever and runs real strong now. The saw even got a 5th place in stock saw racing behind 4 dolmar 6400's.
Poulan pro 305 is 49cc with a 18" B+C with .325 stihl RS chain, rebuilt carb, new fuel filter, muffler modded-inside baffle removed and extra holes in front cover. magnesium metal cased. The saw has no issues what so ever and runs real strong too.
If anyone is interest pm me for details or if you would like some pics of the saws, so i could go ahead and post them for you.
These saws need nothing but some 40-1 mix and bar oil. Ready to go. Both saws come with the inner dawgs, I dont use dawgs and removed them for my usage.
I have just got into modded saws so much now and use the stock saws less and less. Plus the herd is growing more then i need. The green one on the right 3750, front and center yellow one 305.
Last edited:
