I just did this repair to mine and it worked great, unfortunately, it seems that I now have a leak where the fuel line comes throught the tank. Any idea what "glue" would work the best to seal up the hole?
Thanks!
Ok that explains a lot. 30 day's would have been long enough to damage the new line if it had been exposed to a high concentration of ethanol, but since you have only run canned fuel in it that's not likely the problem.
I think the hole in the plastic tank has been stretched out. You can probably fix that by using a .211 X .117 fuel line in the tank to the barbed fitting. The bigger diameter line should seal the tank hole fine that way.
Enter your email address to join: