Poulan Pro 295

[Rivet Watcher]

The two screws that hold the ignition module came loose, and now it touches the flywheel. Need to know what the spaceing should be. Operator manual useless.:monkey:

 

[HiOctane]

Between .012 and .015 of clearance will be fine.

 

[retoocs555]

If you don't have a gauge a business card will work fine to set the gap.

 

[Cut4fun]

For a quick set up. I used a piece of writing paper or normal copy paper and fold it 3 times. Lay between flywheel and coil. Tighten back down. That way you can get both sides at once lined up.

 

[Freakingstang]

If you don't have a gauge a business card will work fine to set the gap.

Nice Tip. I am here to verify that it works!


-Steve

 

[Rivet Watcher]

Poulan pro 295

Thanks to those who replied. The card trick worked for me.:hmm3grin2orange: