Stumpys Customs
Stumpbroke
I love my job. I get to play with stuff like this. 119cc's of Brand new, just off the shelf Swedish muscle.
Project Stumpbroke 3120xp
- Thread starter Stumpys Customs
- Start date
Help Support Arborist Forum:
Stumpys Customs
Stumpbroke
I started out making the carb adjustable on the high side.
Before
After
Before
After
Stumpys Customs
Stumpbroke
This saw will be getting the stage 2 treatment other than the carb work & an unlimited coil.
Sqishband and base cut.
Everything laid out. I got plenty of elbow room in here.
Sqishband and base cut.
Everything laid out. I got plenty of elbow room in here.
Last edited:
Stumpys Customs
Stumpbroke
All done.
Stumpys Customs
Stumpbroke
And for the muffler
Stumpys Customs
Stumpbroke
And the moment you've been waitin for.
[video=youtube_share;av9XGBuUenI]http://youtu.be/av9XGBuUenI[/video]
[video=youtube_share;av9XGBuUenI]http://youtu.be/av9XGBuUenI[/video]
Mtthwvn
ArboristSite Operative
Man.... That thing is a wood eatin monster... Thanks for the video. Been on a few threads where you have to skim through 30 some odd pages just to see a clip of the saw running, and then after that a few still don't have any.
Dan_IN_MN
Addicted to ArboristSite
As always, a great thread!
What is in the carb in the H spot before you add the screw?
What is in the carb in the H spot before you add the screw?
Buffhunter
ArboristSite Operative
Damn stump that sounds awesome with that pipe.... that looks like one bad mam a jam a!!!!! Wish I had the cash I would be sending one your way..... what kinda rpms is that thing turning buried?
Stumpys Customs
Stumpbroke
As always, a great thread!
What is in the carb in the H spot before you add the screw?
It's just a blind hole.
Thanks, I'm liking the pipes I've been doin too. not to loud & flows real good.
It was turning around 10,300 in the cut with an 8 pin rim.
LegDeLimber
Addicted to ArboristSite
What pitch are you tapping the hole with?
and just to check my eye ball powers on this one
(have an odd vision issue and trying gauge my photo reading)
are you boring the squish and facing the base with same tool.
...nothing wrong with not needing to swap tools.
and just to check my eye ball powers on this one
(have an odd vision issue and trying gauge my photo reading)
are you boring the squish and facing the base with same tool.
...nothing wrong with not needing to swap tools.
andydodgegeek
The stool maker
Another excellent job done Stumpy. I sure would like to be a fly on the wall in the stumpshack durring one of these builds. Not saying you draw flies.:msp_w00t:
Stumpys Customs
Stumpbroke
It's a 8 -32 screw for the carb.
I use different tools & setup for the squishband & base.
THanks, I know there isn't a huge time difference, but the saw has a whole different feel. I can lay on the thing now. It'll just get better when it gets broke in.
All I'm using a Kodak easyshare camera. Nothing special at all.
It does smell in here quite often.
Sounds good Stumpy. The big saws are a huge disappointment as they come from the factory here in the US. They really wake up with some mods. Did you mod the carb yourself?
good job. yeah i saw it bog couple times in the before vid. i knew you was gonna be famous. can i have your autograph?
wondering about the high side screw. any way you could pull it out and get a pic of the end?
wondering about the high side screw. any way you could pull it out and get a pic of the end?
Stumpys Customs
Stumpbroke
Yes they are very disappointing stock.
Yes I done the carb myself.
I'll sign your saws at the GTG:rolleyes2:
I'd rather not pull the screw out right now. I cut a shoulder & tapered the end. nothing real fancy.
WKEND LUMBERJAK
Addicted to ArboristSite
Excellent thread as always . Waiting patiently.
Stumpys Customs
Stumpbroke
Excellent thread as always . Waiting patiently.
HAHA, I've got a 346xp to do, then yours is next. What do you think about a 94cc, Jonny VS husky shootout vid??
andydodgegeek
The stool maker
Not as big of a beast but I wonder how a 2100 would stack up against this thing?
