I had a load of mostly Remingtons once.
Mark
Mark
Remington Chainsaws(including Mall chainsaws)
- Thread starter wampum
- Start date
Help Support Arborist Forum:
saw hoarder
ArboristSite Lurker
Hey Mark,
The yellow saw at bottom left looks like a Ram Tools clam shell model. I didn't know those came in yellow. Mine are red. Do you still have the saw?
Mike
The yellow saw at bottom left looks like a Ram Tools clam shell model. I didn't know those came in yellow. Mine are red. Do you still have the saw?
Mike
It is indeed a Ram, Mweba has it now.
Mark
Mark
cobey
Addicted to ArboristSite
i was thinking thats what it was, his has screen in the starter cover
cobey
Addicted to ArboristSite
i was thinking that was what it was, my buddys had a starter cover with screen in it.. I think two different 754's?
Typical Bendix Scintilla magneto coil on a Logmaster type. Insulation cracking up. Allowing moisture to corrode the secondary which leads to an open circuit.
Also, this is the second one that has the keyway wallowed and the key broken. Fortunately the flywheel Is only responsible for starting and cooling. No magnets.
Also, this is the second one that has the keyway wallowed and the key broken. Fortunately the flywheel Is only responsible for starting and cooling. No magnets.
I've had success repairing these by coating the coil with RTV silicone as long as the spark plug lead is still attached. Work it into the cracked areas as much as possible and let it cure - at least couple days. I think I've wrapped some with electrical tape after the silicone cures.
I use this stuff.
Electrical aisle at Lowes
Need an IPL for this SL-5R.
Pulled the bar/chain/reducer and there is a vast difference in the PTO side compared to adirect drive.
Pulled the bar/chain/reducer and there is a vast difference in the PTO side compared to adirect drive.
The clutch is a monster. 4 1/4" drum.
Crankcase cover is all broke to hell.
Crankcase cover is all broke to hell.
The behind side of the SL-5 gear drive. 4 1/4" clutch.
Looks like the same clutch as my Mall GP. Yep, it's a bigun.
Got a parts list and illustration set from Goball. Covers the GP, GL, SL, SL-5 and GL-7.
GL-7 from PA.
A big thanks to FarmerSteve!!!!
A big thanks to FarmerSteve!!!!
Since I've been defeated by the Logmaster, I drug out this old warrior for self confidence boost.
Wards 4.0/Remy PL-5.
Starts easy, runs great. I bet he would keep up with my Husky 65L and give the JRed 630 a tuff time.
Wards 4.0/Remy PL-5.
Starts easy, runs great. I bet he would keep up with my Husky 65L and give the JRed 630 a tuff time.
2treeornot2tree
Dont cry, just do it
Anyone interested in 2 mall 12 a saws? One has a bow saw, the other one a bar. Both have spark.
Also have a sears craftsman saw from 1948 I believe and a lancaster pump manufacturing top handle from about the same time period.
Also have a sears craftsman saw from 1948 I believe and a lancaster pump manufacturing top handle from about the same time period.
2treeornot2tree
Dont cry, just do it
What's a fair value for a mall 12a bow saw. The saw has spark and compression. I have never put fuel in it to see if it would start.
G dub
New Member
Hi guys. New to the forum. I had a Remington Super 660. I loved that saw and still miss it. I'm currently trying to re- identify an old Mall 2 man chain saw that I started restoring over 20 years ago and its turned into a project that I'll never get to. It's all in parts now. I knew everything about it years ago, but I don't remember much about it now. I'll get some pictures posted!
G dub
G dub
