SACHS DOLMAR 112 chainsaw

[Brushwacker]

Previous owner abused the chain enough to stretch it and it needs shortened as well as an extra chain I'll include thats wore further along, still plenty length in the cutter in the newer safety chain that had the bumper filed down to allow it to cut agressively. The Oregon powermatch 70 drive link bar is not hurt and still in very good condition. Has about a 1 inch crack in the clutch cover. I drilled a hole at the end about 2 years ago and it has stayed the same since. (this is the 2nd time I've owned this saw. I don't see any significant flaws, just its not pretty from aging,dirt, minor abraisions and some one grabbed it with mortar or something on their hand, getting some on the rear handle and trigger. It could clean up better if some one wants to spend the time, but I am selling it as a work saw, as is. I used it some, (approximately 2 tanks of gas) this spring until the chain was out of adjustment. It does start, revs up and down, idles, oils all normal.
$125 + shipping which I only ship to U.S. addresses. I will include a new chain for another $15.

 

[hayboy]

Previous owner abused the chain enough to stretch it and it needs shortened as well as an extra chain I'll include thats wore further along, still plenty length in the cutter in the newer safety chain that had the bumper filed down to allow it to cut agressively. The Oregon powermatch 70 drive link bar is not hurt and still in very good condition. Has about a 1 inch crack in the clutch cover. I drilled a hole at the end about 2 years ago and it has stayed the same since. (this is the 2nd time I've owned this saw. I don't see any significant flaws, just its not pretty from aging,dirt, minor abraisions and some one grabbed it with mortar or something on their hand, getting some on the rear handle and trigger. It could clean up better if some one wants to spend the time, but I am selling it as a work saw, as is. I used it some, (approximately 2 tanks of gas) this spring until the chain was out of adjustment. It does start, revs up and down, idles, oils all normal.
$125 + shipping which I only ship to U.S. addresses. I will include a new chain for another $15.

Do you Know where I can find a air filter for a black cover SD 112??

 

[Brushwacker]

Try the swap meet thread or I think there is a Dolmar or S-D thread also . I think its Cutting Edge, is still a sponser and is a dealer and good source for S-D parts.

 

[Brushwacker]

There is a 2nd chain that needs sharpened and shortened also, Oregon full cihisel, about 35% left of cutters.
This should make someone a good 50cc work saw as long as it is cared for right.