Sachs Dolmar Chainsaws Thread

[nstueve]

Ok boys... here is the 6800i that I was happy to get my hands on even though I paid to much for it... There is some rot on the clutch cover and the lablels are tore up but the saw is in really good shape overall! I had all the bits and pieces i needed to fix it up from a donor 120si carcass! Looks like plenty of room on the top recoil side of the muffler for a 2nd muff port!

 

[Kanscruzer]

Don't forget the 116si, same exact bottom end.

I have a 76 cc 116si.

I would like to read more on this saw , 272 husky to 116 what does it take to do it ??

 

[nstueve]

anyone got a model number for this thing??? :msp_confused:

Dolmar Top Handle Saw | eBay

Also anyone that has a "mix" of saw brands might appreciate having the ability to use a Stihl bar on their Dolmar!
Steve just made a batch of laser cut bar adaptors for use Dolmar/Makita guys. They should work on 7900/6400/9010... etc... any dolmar D009 bar mount. You can also use a stud kit to swap your 116/6000/120-120si/6800i over to D009 (9mm) instead of the K095/A095 (8.2mm) mount. Then you can use any D009 mount bar and you can also use any Stihl mount bar with these adaptors... I'll check with steve on making a K095 adaptor...
http://www.arboristsite.com/chainsaw/221950-5.htm#post4121455

 

[166]

anyone got a model number for this thing??? :msp_confused:

Dolmar Top Handle Saw | eBay

Also anyone that has a "mix" of saw brands might appreciate having the ability to use a Stihl bar on their Dolmar!
Steve just made a batch of laser cut bar adaptors for use Dolmar/Makita guys. They should work on 7900/6400/9010... etc... any dolmar D009 bar mount. You can also use a stud kit to swap your 116/6000/120-120si/6800i over to D009 (9mm) instead of the K095/A095 (8.2mm) mount. Then you can use any D009 mount bar and you can also use any Stihl mount bar with these adaptors... I'll check with steve on making a K095 adaptor...
http://www.arboristsite.com/chainsaw/221950-5.htm#post4121455

PS-3300TH made by Tanaka.

 

[sawfun9]

Cherry 166 on Ebay right now.

 

[Brad2185]

Cherry 166 on Ebay right now.

currently at 6 bills and still over a week left on the auction.....:msp_ohmy:

 

[Nardoo]

I won't pick it up for a few weeks but I am quite excited about it. No doubt a Dolly 310 but an Aussie McCulloch rebadged one. Have not been able to find any literature on it yet but will keep digging. Hoping it is still a runner but with chop saws who knows. Will sit nicely with my Poulan 6000.

 

[tbone75]

currently at 6 bills and still over a week left on the auction.....:msp_ohmy:

They usually get ended early !

 

[gmax]

I won't pick it up for a few weeks but I am quite excited about it. No doubt a Dolly 310 but an Aussie McCulloch rebadged one. Have not been able to find any literature on it yet but will keep digging. Hoping it is still a runner but with chop saws who knows. Will sit nicely with my Poulan 6000.

Al, That looks to be in good condition, good find! :msp_thumbsup:

I have another yellow Dolmar 110, It needs some work but I managed to get it running just before the starter died

[video=youtube;_lUZu4ErxBQ]http://www.youtube.com/watch?v=_lUZu4ErxBQ[/video]

 

[nstueve]

Cherry 166 on Ebay right now.

currently at 6 bills and still over a week left on the auction.....:msp_ohmy:

hmmmm...
so how much is lee going to pay for this one?

also just picked up a little 341... Anyone got a good 401 P&C?

 

[Nardoo]

Al, That looks to be in good condition, good find! :msp_thumbsup:

I have another yellow Dolmar 110, It needs some work but I managed to get it running just before the starter died

Nice little Dolly Wayne. Is it a PM4300 or a PM5200? I love the yellow ones - still kicking myself for not grabbing that cherrry Mac SP118 last year. And BTW, do you know anything about a NOS 088 sprocket & drum kit?
Thanks! :msp_thumbup: It will go nicely on the 084.

 

[gmax]

Nice little Dolly Wayne. Is it a PM4300 or a PM5200? I love the yellow ones - still kicking myself for not grabbing that cherrry Mac SP118 last year. And BTW, do you know anything about a NOS 088 sprocket & drum kit?
Thanks! :msp_thumbup: It will go nicely on the 084.

The McCulloch decals are missing but It's a Sachs Dolmar 110 ,so that would make it a PM4300.
I might know something about a NOS 088 sprocket & drum kit

 

[Eccentric]

Interesting. In the US (where no McCulloch badged SD's were sold), a PM4300 was a late production PM700 instead of a yellow SD 110.

 

[sachsmo]

I won't pick it up for a few weeks but I am quite excited about it. No doubt a Dolly 310 but an Aussie McCulloch rebadged one. Have not been able to find any literature on it yet but will keep digging. Hoping it is still a runner but with chop saws who knows. Will sit nicely with my Poulan 6000.

Nice saw there mate.

It is not however a 310. I believe the 310 is based on the 153.

Looks a whole lot like the 309, or whatever Wacker# they used around these parts. (most were 47mm bore)

It does appear to have a 14", so it could be 55mm (95cc)

What would be the bore of that cut-off?

 

[excess650]

Dolmar 100

A couple of pictures of my little Dolmar.View attachment 277414 View attachment 277415 This is the 33cc 100 introduced in 1984.

Its slightly larger sibling is my favorite lightweight saw. View attachment 277417 View attachment 277418 This is the Makita DCS 401. A muffler mod and retune really wakes this one up.

 

[Nardoo]

Nice saw there mate.

It is not however a 310. I believe the 310 is based on the 153.

Looks a whole lot like the 309, or whatever Wacker# they used around these parts. (most were 47mm bore)

It does appear to have a 14", so it could be 55mm (95cc)

What would be the bore of that cut-off?

Thanks for the feedback. I was kind of hoping it was the 153 based saw but I guess I was mistaken. I will pick her up in a fortnight and report back. Nice 153 sold on Oz ebay tonight for around $360.00 I thought I had it but was sniped again. Starting to be worth some money these old dollies.

 

[NathanA]

Thanks for the feedback. I was kind of hoping it was the 153 based saw but I guess I was mistaken. I will pick her up in a fortnight and report back. Nice 153 sold on Oz ebay tonight for around $360.00 I thought I had it but was sniped again. Starting to be worth some money these old dollies.

Might have been bidding on the 153 too got big money

 

[thechainsawguy]

52mm cylinder, need help identifying.

Hi, I don't know if this cylinder is for Dolmar, but it came in a box of all Dolmar parts with Dolmar saws. It looks new, maybe someone knows what it fits. It says 52zn9 on the side. It is 52mm.View attachment 277564View attachment 277565View attachment 277566

I also got this piston with it, but its used, fits fine, but I don't know if it is the right one for it. Interesting piston with the hollow on top.

Any help appreciated. Thanks, Dave.

 

[superdolmar]

Never seen a cilinder like this before on a Dolmar saw.

Marco

 

[sachsmo]

Hi, I don't know if this cylinder is for Dolmar, but it came in a box of all Dolmar parts with Dolmar saws. It looks new, maybe someone knows what it fits. It says 52zn9 on the side. It is 52mm.View attachment 277564View attachment 277565View attachment 277566

I also got this piston with it, but its used, fits fine, but I don't know if it is the right one for it. Interesting piston with the hollow on top.

Any help appreciated. Thanks, Dave.

Yup,

that be the correct piston for the 133.

If you ever pulled one over, you would know why they're dished.

In the process of scabbing together a a 133 with a head and a hoggin'