Sachs Dolmar Chainsaws Thread

[Nardoo]

That silver one is pretty. I got some yellow ones:msp_smile:

And I am getting a nice lime green one soon too.

Al.

 

[67 Mustang]

That silver one is pretty. I got some yellow ones:msp_smile:
And I am getting a nice lime green one soon too.

Al.

Awesome looking saw there, Al!

 

[joe25DA]

112 carb

Finished up my Grey/Black 112 recently. New fuel line, ring, and carb kit. Saw has great compression and spark. But I cant get it to do more than pop. Ive checked the metering lever, I know its getting fuel. Any ideas? Im ready to get a new carb.

 

[Nardoo]

Finished up my Grey/Black 112 recently. New fuel line, ring, and carb kit. Saw has great compression and spark. But I cant get it to do more than pop. Ive checked the metering lever, I know its getting fuel. Any ideas? Im ready to get a new carb.

Joe, is the flywheel key sheared? Maybe the timing is off. To see if the coil is OK, spray a little mix down the carb throat and if she runs for a while spark is not your problem.
My 112 is an early one with points and even though it showed spark the coil could not produce spark in compression (when the plug was in). I put an electronic coil from a 120Si and she runs like a champ. You can use the old flywheel too.
Great little saws. Mine has the 120 dog to give it attitude.:hmm3grin2orange:

Al.

 

[joe25DA]

Joe, is the flywheel key sheared? Maybe the timing is off. To see if the coil is OK, spray a little mix down the carb throat and if she runs for a while spark is not your problem.
My 112 is an early one with points and even though it showed spark the coil could not produce spark in compression (when the plug was in). I put an electronic coil from a 120Si and she runs like a champ. You can use the old flywheel too.
Great little saws. Mine has the 120 dog to give it attitude.:hmm3grin2orange:

Al.

Thanks Al, I will check the flywheel and points.

 

[Nardoo]

Joe, it is well worth fitting an electronic coil anyway. One from any of that series like the 115, 120Si (and I think the later series of saw) will make it run really well and start easier. The gurus will be along soon to tell you which saws are compatible.

Al.

 

[joe25DA]

Joe, it is well worth fitting an electronic coil anyway. One from any of that series like the 115, 120Si (and I think the later series of saw) will make it run really well and start easier. The gurus will be along soon to tell you which saws are compatible.

Al.

Thanks Al, I was just gonna ask what modules were compatible.

 

[John C]

510 mods

I am new to modding saws....any recommendations on beefing up my ps-510...its brand new...and please dont tel me to buy a 5105...i would have but didnt have the money at the time...thanks, john

 

[colorada]

hello everyone, would any of you folks have a service manual for a dolmar 116? i am trying to put one to cuttin. thank you.

 

[Nardoo]

I do not have a service manual but they are very easy saws to work on. Here is and IPL for you 116:

http://charlotte.preferredpower.com...etrol Engines/113, 116/995700053(1985-11).PDF


Al.

 

[Nardoo]

Who got the big yellow Dolly on Aussie eBay?

 

[colorada]

hello, been lookin and askin for a dolmar 113 service manual, anyone know where to find one? thank you.

 

[Stihl-Pioneer]

I am new to modding saws....any recommendations on beefing up my ps-510...its brand new...and please dont tel me to buy a 5105...i would have but didnt have the money at the time...thanks, john

If yours has a cat muffler, either replace it with a non cat or neuter your cat and retune is a good start on it.

 

[Nardoo]

hello, been lookin and askin for a dolmar 113 service manual, anyone know where to find one? thank you.

Here is an IPL:

http://charlotte.preferredpower.com...etrol Engines/113, 116/995700053(1985-11).PDF

 

[Nardoo]

I love my Dollies and big Poulans. This old girl satisfies both needs. Apologies to the fellows over in the Poulan sticky for reposting the same pics. Will get around to cleaning it up soon but it seems to be a good goer despite the broken rear handle and the custom starter handle.:msp_smile:
Green Dolmar 152.

Al.

 

[leeha]

Sweet saw Al. You will like it alot.




Lee

 

[gmax]

Al, That's a good find

 

[sachsmo]

I like them green Dolmars,

The yella and black ones make me old heart skip a beat.

 

[russhd1997]

I love my Dollies and big Poulans. This old girl satisfies both needs. Apologies to the fellows over in the Poulan sticky for reposting the same pics. Will get around to cleaning it up soon but it seems to be a good goer despite the broken rear handle and the custom starter handle.:msp_smile:
Green Dolmar 152.

Al.

I like the custom pull rope handle! Sweet saw! :msp_w00t:

 

[gmax]

Dolmar 115i

I just finished replacing the piston on my Dolmar 115i , I used a Episan piston , very nice quality the rings look good too.
The original cylinder was still good it just needed a light sand.

I did some cutting this morning comparing it to my Stihl 034 with a aftermarket 036 P/C, the 115i gave the 034 a good hiding.... I will be keeping the 115i