Scrounging Firewood (and other stuff)
- Thread starter mainewoods
- Start date
Help Support Arborist Forum:
I just hope they all don't die up in the Catskills, about 30-40 percent of my trees are Ash (ditto Black Cherry), but the wind seems to be taking them down as fast as they grow the last 20 years!
Well I know it's bad down by Bob (spike)'s shop and it's bad up to Rochester. Still only affecting a few trees up by Albany.
I don't know what your experience with saws is, but when you get your hands on that 038 super, the inside of your visor will be covered in spit from you giggling! You won't have to worry about aggravating the neighbors either because you'll be done cutting all your wood in an hour. 2 and a half times the horsepower at least from that little saw!
http://www.ebay.co.uk/itm/stihl-038-super-chainsaw-with-spare-sthil-chain-/132229584473?_trksid=p2047675.l2557&ssPageName=STRK:MEBIDX:IT&nma=true&si=5OCLb8gfKvsa7KkCJCUFIvAdkDg%3D&orig_cvip=true&rt=nc
Hopefully it is in full working order as described. So long as I don't pick up something wrong with it on collection, then I'll put up a thread in the chainsaw forum in due course, with a link of course.
yay!
But, this is what he did not get, my unported MS440 Noodling Red Oak (it really runs like a larger saw)!
Standing that round up looks like a feat in itself!
Wife tried to scrounge up a deer this morning but it got away. I took my frustrations out on the split pile. On the upside, I picked up the beginnings of a scrounging trailer today. Old camper frame that some barnyard savage has brutalized but I'll make something out of it. Too dark for pics.
- Joined
- Jan 14, 2002
- Messages
- 4,800
- Reaction score
- 12,596
- Location
- North of Goderich, Ontario, Canada
Did some splitting and stacking today. Darn dog chased a chipmuck and ran under my car trailer. 2 stitches and a nice Vet bill.
Silly dawg. Vets charge more than bulls in my experience. How much to do fit in those crates?
I trooped out to the Lady Farm today. Now that she is going to lease a place just down the road, I don't need to ferry wood to my place, we can just move it down the road when the time comes. The load I took home on Friday is still here, I 'forgot' to take it back today. What I did do was pick up some of the wood I had cut previously and carted it down to the Lady Shed. Amazing how quick it is to pick up a load when you don't have to cut it first. Nice clean peppermint.
After unloading that I moved on to look at a dead standing peppermint nearby. There are a few more behind it that might get some attention too.
Shortly after...
Most of the peppermints I have been cutting recently have been termite free, but termites like this stuff as much as I do and unfortunately, they had found this one.
I don't mind them taking a bite here and there, but when they eat half of it...bastards. Anyway, let it not be said that I don't heed good advice. I am coming around to the idea of using smaller saws on smaller wood. Here is my small saw that I used on small wood.
And here it is again! The little 460 was perfect for this small stuff. Glad I didn't use the big saw.
Inside that dead peppermint I dropped, I found this little guy. He was asleep and not that thrilled about being woken up from his hibernation. I found a hollow log he could go back to sleep in.
I took the load of partly ratty termite addled peppermint down and chucked it in the Lady Shed. It looks a bit better when stacked. She was off in town at some children's trampoline birthday party so I had the run of the joint.
Hopefully, that will see her through the next two weeks, even the way she burns it, which seems to be as fast as possible.
After doing all this, there was my fee to be charged, of course.
About half a cube. Not so many termites in that trailer though.
I took the load of partly ratty termite addled peppermint down and chucked it in the Lady Shed. It looks a bit better when stacked. She was off in town at some children's trampoline birthday party so I had the run of the joint.
Hopefully, that will see her through the next two weeks, even the way she burns it, which seems to be as fast as possible.
After doing all this, there was my fee to be charged, of course.
About half a cube. Not so many termites in that trailer though.
Pics of the future scrounge wagon. Old camper frame that some jagoff cut right behind the axles. No problem for a guy who can weld! Also it's 13' long so the dilemma is, cut it to 12 or cut a foot off 14' boards....hmmm 
One of these is not like the other! I have a set of 4 that match and aren't weather cracked.
I intended to split this morning and even woke up the laziest son to work the stew out of him for a life lesson. Much to his delight, a thunderstorm blew in. So I'm out in the garage servicing the saws I used last. This end off a broken snow brush is a great tool for cleaning filters in the field and the paint brush gets in the tight spots under the covers. Both are kept in my saw box along with a few tools, spare chains, files, wedges, earplugs and gloves......
One of these is not like the other! I have a set of 4 that match and aren't weather cracked. I intended to split this morning and even woke up the laziest son to work the stew out of him for a life lesson. Much to his delight, a thunderstorm blew in. So I'm out in the garage servicing the saws I used last. This end off a broken snow brush is a great tool for cleaning filters in the field and the paint brush gets in the tight spots under the covers. Both are kept in my saw box along with a few tools, spare chains, files, wedges, earplugs and gloves......
Did a bit of scrounging yesterday at my mate property on the rural outskirts of Sydney. The ground was a bit wet so I couldn't get over to the good part of the property where the Iron bark is. So had to settle for dead dry Sydney Grey gum, not sure how good it is but its not nearly as dense as Iron bark. This stuff will be burn in two seasons from now.
This size wood is actually good as no splitting required. There were a few big bits which required the Dolmar.
I go through 4 loads like this in a season.
I go through 4 loads like this in a season.
This section of fence (16' between big posts) was stacked with ash rounds this morning. After the thunderstorms blew through, we managed to work through it all
This was some of the oldest wood I have, before I started stacking on skids, so the bottom row was pretty heavy. 
The "done been split" pile is a growing!
Got to work with my youngest son, 16, and he is a good but reluctant worker. Lol. I'd rather be fishing I told him, but if he wants his own bedroom, we gotta do this first! Otherwise I can sell this house and we can head to the lake now. He thought we should split the wood. Lol.
This was some of the oldest wood I have, before I started stacking on skids, so the bottom row was pretty heavy. The "done been split" pile is a growing! Got to work with my youngest son, 16, and he is a good but reluctant worker. Lol. I'd rather be fishing I told him, but if he wants his own bedroom, we gotta do this first! Otherwise I can sell this house and we can head to the lake now. He thought we should split the wood. Lol.
That's the problem, when they get to the age of being a capable worker they don't want to help.
My 4 year old is very willing, he always wants to help LOL.
My 4 year old is very willing, he always wants to help LOL.
- Joined
- Jan 14, 2002
- Messages
- 4,800
- Reaction score
- 12,596
- Location
- North of Goderich, Ontario, Canada
Wood Nazi, I use lots of trailers like that to make my trailers. I cut them to the over all length I want and just weld in new axle hanger brackets where I want the axle to be. Easier than cutting the front and moving it all. I usually just make a complete new frame on top of the rec tube using 1/4"x 2x2" angle to the width I want too. First 2 pics are a 16' with beaver tail for the lawn mowers. 3rd one is a 20' used mostly for the steiner and sweeper or 3 mowers.
Scourged up some nice spruce couple weeks ago, didn't have a lot of time and it was close to the road 
Then last week found a real nice Idaho oak (well close as we have to oak, larch) blown down right in the road doesn't get any better than that
horse trailer was full so had to break in the "new" pickup...
Then last week found a real nice Idaho oak (well close as we have to oak, larch) blown down right in the road doesn't get any better than that horse trailer was full so had to break in the "new" pickup...
Nice pics Jeff. Assuming there are no identification issues, grey gum (e. propinqua/ e. punctata) has an air dry density of 1080kg/m. Can't complain about that!
You know it's a big trailer when you have to take an aerial photo! I've always wanted a utility trailer. As a welder, I've built trailers of all kinds from scratch, just never for myself. If I cut the rear spring bracket off and move it in front of the other wheel, I can just unbolt everything else and move the whole assembly ahead. This one I'm going to build (finish) at home with my old stick welder and a chop saw and see how cheap I can keep it. I may cheat and use the press brake at work to make fenders. My only dilemma is do I leave it at 13' or cut it to 12?
Similar threads
Want to Sell
4 free saws
