seal puller

[lone wolf]

where can i get a seal puller for crank seals?

 

[Andyshine77]

You can order them from your local Stihl dealer, they go for about $300 :jawdrop:

 

[lone wolf]

have another way I can get it out w/o damage

 

[Bowtie]

Yep, ouch! Thats why most of us fabricate our own system/setup!

 

[lone wolf]

pull seal

the screwdriver in the seal worries me as far as scratching the crank how about drill a hole in the rim insert a screw and pull?

 

[Andyshine77]

Scratching the crank is highly unlikely, it's the case you need to worry about.

 

[cjnspecial]

This may work.
http://www.thetoolwarehouse.net/p-3189-lisle-58430.aspx

 

[lone wolf]

seal

its out thanks for the help I cut the rubber away from seal with exacto knife as to have more room to work,then gave the rim a tap to break it free then pulled it straight up with a curved snap on pick no prob.thanks for the responses .

 

[kam]

1. Protect the crankshaft with tape

2. gently centre punch the metal part of the seal at 180
degrees apart

3. drive 2 drywall metal stud screws into the seal (not all
the way down.

4. grab the 2 screw heads with 2 pairs of pliers, and with
the palm of your hands resting on the saw housing, lift
up on the pliers.

I was able to pull the seals on my 036pro this way...worth a try.

 

[Steve K]

This may work.
http://www.thetoolwarehouse.net/p-3189-lisle-58430.aspx

I use this Lisle puller all the time. I filed down the lip and the width on the puller to make it easier to get into the smaller seals.

 

[AKDriveSprocket]

This looks look my next tool to go in the tool box. Does any one got a vid on you tube using this puller?

 

[AKDriveSprocket]

http://www.youtube.com/watch?v=h8A0tenCLGw
This looks good.

 

[Evanrude]

http://www.youtube.com/watch?v=h8A0tenCLGw
This looks good.

Gotta get me one of those, that works pretty slick.

 

[AKDriveSprocket]

Your local Car Quest has this and run $22.00. I just picked one up today. Shipping to Alaska kills us up here so I just paid the $22.00.

 

[madhatte]

I need one o' that.

 

[shawn022]

Gotta get me one of those, that works pretty slick.

I got one. It works great. Sometimes I use a regular or deepwell socket as an extension for the piviot point to get more leverage or to use a better area of the saw case to pry on.

 

[FATGUY]

I am so getting one of those! Got a Husky 380cd I can not get the seals out of.

 

[edisto]

I am so getting one of those! Got a Husky 380cd I can not get the seals out of.

Grab 2 and send me one.

 

[stinkbait]

Wow, they really hit you hard with shipping and handling and the minimum order surcharge:


Product Quantity Sub Total:

--------------------------------------------------------------------------------

Shaft Type Seal Puller
SKU: LIS58430 1 $13.65




Sub Total: $13.65
Minimum Order Surcharge (applied when sub total is less than $25.00): $10.00
Shipping: (UPS Ground) $8.95
Tax (if shipping to NY, NJ, IL, TX, or NV): $0.00
Total: $32.60

That's BS! I just got one for $18 shipped.

 

[redunshee]

That's BS! I just got one for $18 shipped.

I agree. Canceled order when I saw a $10.00 surcharge. Total rip off