Specs/info on Jonsy 1115?

[John in MA]

Anybody here have the specs or general info on a Jonsered 1115? Apprx. value?

Thanks

 

[WOLF_RIVER_MIKE]

John, can't find anything on a Jonsered 1115. Have info on a 111 S? 110 cc, Tillotson carb, chrome plated cyl.

 

[John in MA]

You're problably right. I'm not the one with the saw. How old were these puppies?

 

[WOLF_RIVER_MIKE]

Sorry John, I don't know that.. Bet Dennis would know, Might have to call down at the Clearwater lockup, if John L. is still around,

 

[Dennis]

John the 111 has a 56mm bore and 48mm stroke..110cc ...13cc combustion chamber stock...From what I can recall it is about 25-26 years old...I am in the process of building one as we speak...its just getting all the peices put back together after modifications...

 

[John in MA]

Sounds like fun. What kind of mods are you doing? Might want to hop up this thing a little if I have it apart.

Also, are there any problems I should watch out for? Do they still have a decent parts supply?

Thanks

 

[Dennis]

John...I am actually doing quite a bit of work to the 111..building a stock appearing race saw...machined the base of the cyl...squish band...changing port timing..etc..should be a good runner....We will be testing it out on the 10th or so when Robert gets back to Clearwater....*God help me*...

George Blake is the man for 111 parts...sedanman gave his address on another post...have fun!