Want to Sell Stihl 025

[Jimmy in NC]

Stihl 025. 16" picco setup with rim sprocket. Muffler mod, new carb, new fuel line, new fuel filter, new oil line, side adjust chain tensioner. This saw is 100% but just sitting. I'm genuinely surprised how well of runs. $220 gets it shipped to your door in the lower 48. Also will entertain interesting trades including chain and bars.

 

[Brushwacker]

I just had 1 of those stolen off me about 2 weeks ago .
What would you be interested in for chains, bars, chain saw types, models in what condition.
I have plenty of new Stihl RS 84 3/8 .o50 dl chains and various other loops in various good brands. Could spare some .325 .063 bulk, a bit of 3/8 milling .o50+.o58. Some new bars, this and that.
A while back I bought an auction lot of Bosch 24v cordless tools, they have some age,but really nice quality, not abused or wore out, and I ended up with an extra circular saw and saws all reciprocating saw, could spare a battery or 2, think I have an extra charger and light. New after market batteries are about $60 which I bought a couple or 3 that have been working fine.
Let me know in more detail what type and quanity of stuff may trip your trigger in trade, John

 

[SAWMIKAZE]

Did you have to add a drive link with the rim set up as opposed to the spur , what bar sizes were you lookin for ?

 

[Jimmy in NC]

I just had 1 of those stolen off me about 2 weeks ago .
What would you be interested in for chains, bars, chain saw types, models in what condition.
I have plenty of new Stihl RS 84 3/8 .o50 dl chains and various other loops in various good brands. Could spare some .325 .063 bulk, a bit of 3/8 milling .o50+.o58. Some new bars, this and that.
A while back I bought an auction lot of Bosch 24v cordless tools, they have some age,but really nice quality, not abused or wore out, and I ended up with an extra circular saw and saws all reciprocating saw, could spare a battery or 2, think I have an extra charger and light. New after market batteries are about $60 which I bought a couple or 3 that have been working fine.
Let me know in more detail what type and quanity of stuff may trip your trigger in trade, John

Shoot me a pm. Might can work something out.

 

[Jimmy in NC]

Did you have to add a drive link with the rim set up as opposed to the spur , what bar sizes were you lookin for ?

It fit fine with standard loops.

Bars ..... 24 (84 DL) or 32 (105 DL) are my favorites in Husky or Stihl mount. Prefer Husky but I have an adapter.

 

[Jimmy in NC]

Sold.