tacomatrd98
ArboristSite Guru
I have a mostly complete 036 pro and some extra parts. The crankcase is good and top end on the case is really nice from what you can see through the ports. IT WILL NEED CRANK BEARINGS. It turns over but very stiff in the bottom end. Recoil is there, needs a rope, carb is there but not an inteli-carb diaphragm cover. The air filter is there too but is a regular non inteli-carb style, so the carb/filter will work together but are not "pro" versions. It is missing the top portion of the rear handle grip. throttle and choke levers are there. It will need some hardware and misc pieces but this is what i noticed right away.
The lot also comes with 2 other 036 jugs and 2 NWP pistons/ring kits, 48mm. IDK if the pistons are wrong or the bores or what, but the pistons do not fit in the jug. They fit but are way too tight.
One jug has transfer but looks easily fixable, the other one is one I cleaned up with acid and ran a ball hone through it. It looks good, no holes in the coating etc.
Sold as is, no warranties, and I will say it because somebody is gonna ask, NO it does not run.
looking for for $200 for the lot obo.
-AJ
The lot also comes with 2 other 036 jugs and 2 NWP pistons/ring kits, 48mm. IDK if the pistons are wrong or the bores or what, but the pistons do not fit in the jug. They fit but are way too tight.
One jug has transfer but looks easily fixable, the other one is one I cleaned up with acid and ran a ball hone through it. It looks good, no holes in the coating etc.
Sold as is, no warranties, and I will say it because somebody is gonna ask, NO it does not run.
looking for for $200 for the lot obo.
-AJ
