lblac36315
ArboristSite Lurker
Just finished up my latest toy today...
Stihl 056
- Thread starter lblac36315
- Start date
Help Support Arborist Forum:
lblac36315
ArboristSite Lurker
one more
pic
pic
Ryan Willock
Addicted to ArboristSite
Very nice!
Orange Wedge
ArboristSite Member
Looks great! Does it run like it looks?
- Joined
- Apr 3, 2002
- Messages
- 6,083
- Reaction score
- 631
What all did you do to the 056? Brings back thoughts of the 056 that I had for a while.
lblac36315
ArboristSite Lurker
It's a bad bad toy...
I haven't ever ran a larger saw, I can't even imagine what a 088 or 3120 would be like. But this saw rocks, with a liitle advice from Dozer, it has 155 psi of compression, polished exhaust port, matched & modified the muffler. Inside of saw appeared to be brand new. Also just fuel lines, tuneup, carb, new chain, bar and sprocket. With a 25" bar I had to richen it up to bring the rpm's down a little. I've only cut about a 20" dia Oak and I didn't time it, but just guessing about 10 - 15 secs in the cut. I can't wait to save enough to be able to send it out for a professional full mod. That's only if I can talk the wife into it. As you can see I have too many hobbies. Here's a fun pic of two of them. LOL
I haven't ever ran a larger saw, I can't even imagine what a 088 or 3120 would be like. But this saw rocks, with a liitle advice from Dozer, it has 155 psi of compression, polished exhaust port, matched & modified the muffler. Inside of saw appeared to be brand new. Also just fuel lines, tuneup, carb, new chain, bar and sprocket. With a 25" bar I had to richen it up to bring the rpm's down a little. I've only cut about a 20" dia Oak and I didn't time it, but just guessing about 10 - 15 secs in the cut. I can't wait to save enough to be able to send it out for a professional full mod. That's only if I can talk the wife into it. As you can see I have too many hobbies. Here's a fun pic of two of them. LOL
Stumper
One Man Band
When are the babies due? I always thought the 056 could benefit from a set of wheels. It looks as if you will have some great hybrids-if they don't have the disposition of a mule.
lblac36315
ArboristSite Lurker
Hybrids
If I could get the same power out of saw that the truck has...3.5 cc's, running 25% nitro has almost 2 hp at 50,000 rpm. Pulls truck along about 50 mph in 40-50 feet, can't keep front wheels on the ground! But you also can't hardly keep from breaking stuff all the time. Too Expensive...But it's FUN.
If I could get the same power out of saw that the truck has...3.5 cc's, running 25% nitro has almost 2 hp at 50,000 rpm. Pulls truck along about 50 mph in 40-50 feet, can't keep front wheels on the ground! But you also can't hardly keep from breaking stuff all the time. Too Expensive...But it's FUN.
HUSKYMAN
Addicted to ArboristSite
I think Gypos 088 KD turns 50000 rpms.
Nice saw. As far as the car goes, if youre not breakin stuff youre not going fast enough
Nice saw. As far as the car goes, if youre not breakin stuff youre not going fast enough
John in MA
Addicted to ArboristSite
I wonder what a 111S & 1985 RC-10 mongrel would be...
