Want to Buy Stihl 064 HD filter conversion kit

[bowtiescottsdale]

I am going to be switching over to a intellicarb so I figured now is the time to take advantage of the HD filter conversion.

1122 007 1031

Is this part still available from a dealership or do I need to buy it in pieces.

Or I will buy it on here, if someone has it in their position

 

[singinwoodwackr]

I am going to be switching over to a intellicarb so I figured now is the time to take advantage of the HD filter conversion.

1122 007 1031

Is this part still available from a dealership or do I need to buy it in pieces.

Or I will buy it on here, if someone has it in their position

I probably have the parts minus the actual filter.
I have pics…somewhere

 

[bowtiescottsdale]

I probably have the parts minus the actual filter.
I have pics…somewhere

If you find the pictures, send them my way

 

[Mad Professor]

I have an early 064 with the HD kit. Not parting it out, but I can try to get pictures.

Not sure if the plastic parts are still available but the filter parts should be as they are shared with other Stihls (066, 046, 044). Should also be able to use the Australian filter.

 

[singinwoodwackr]

I have an early 064 with the HD kit. Not parting it out, but I can try to get pictures.

Not sure if the plastic parts are still available but the filter parts should be as they are shared with other Stihls (066, 046, 044). Should also be able to use the Australian filter.

I have a large bin full of 064 and 066 plastics
I sent out one set of these several months back so I know I have them.
Used…no NOS other than the oe winter kits for the 64s.

can't find the pics so will go through the bin tomorrow
I believe it is 2 main parts that are needed.

 

[singinwoodwackr]

Ok, figure out which carb box you have
0100 or 0101/0111
I'm not sure it matters, however

You need the metal filter mount and a cover.
There are 2 different styles of mounts.





The covers I have all need some repair but I will do that.

 

[bowtiescottsdale]

I have a 0101 carburetor housing. I am so sure of this because I had ordered another 0101 carburetor housing and they sent a 0100 by mistake. I did not realize this until I had installed the 0100. And then I had to order. Another is 0101 and reinstall again.

 

[singinwoodwackr]

I have a 0101 carburetor housing. I am so sure of this because I had ordered another 0101 carburetor housing and they sent a 0100 by mistake. I did not realize this until I had installed the 0100. And then I had to order. Another is 0101 and reinstall again.

Lots of covers on eBay that are I better shape than mine there are even some nos.
I can repair the cracks so they are functional but won’t be pretty.
I have plenty of the filter mounts and carb mounts.

 

[bowtiescottsdale]

Lots of covers on eBay that are I better shape than mine there are even some nos.
I can repair the cracks so they are functional but won’t be pretty.
I have plenty of the filter mounts and carb mounts.

Very nice, if you could get me a price on carburetor and filter mounts. It would be great

 

[singinwoodwackr]

You just need the filter mount if you already have the 0100 carb box.
$10 and some freight.
Pm me your address