Want to Buy Stihl 1118 160 5400 old style brake band for 028

[Joe Orapello Jr]

Stihl 1118 160 5400 old style brake band for 028

Hoping someone might have one to sell..
I have been looking on the Bay for a while and can not find one. Converting an old 028
without the chain brake and this is the only part I need.

Thanks
Joe

 

[TLG]

Joe, Not all older 028's have the proper attaching points for brake hardware. It's been my experiences that the later 028's have these attaching points for hardware needed.

 

[Joe Orapello Jr]

Joe, Not all older 028's have the proper attaching points for brake hardware. It's been my experiences that the later 028's have these attaching points for hardware needed.

I have all the other hardware for the addition of the Chain brake. The correct Band listed above is what I need.
Thank you for the response

Joe

 

[Joe Orapello Jr]

Joe, Not all older 028's have the proper attaching points for brake hardware. It's been my experiences that the later 028's have these attaching points for hardware needed.

Yes. I have all the other hardware except the above Band. Thank you
Joe

 

[TLG]

Joe, I understand you have the hardware. I guess what I'm trying to say is the early pto side cases did not have the proper machined bosses to mount your hardware for the brake ass. Do you have a picture of your pto case half?

 

[oldguy]

Joe, I understand you have the hardware. I guess what I'm trying to say is the early pto side cases did not have the proper machined bosses to mount your hardware for the brake ass. Do you have a picture of your pto case half?

I made one from one for a husqvarna 55, it is near the same, a couple of needle nose pliars & some heat will make it work.
I did have the broken one to go by, they are unobtainium.

 

[Joe Orapello Jr]

Joe, I understand you have the hardware. I guess what I'm trying to say is the early pto side cases did not have the proper machined bosses to mount your hardware for the brake ass. Do you have a picture of your pto case half?

TLG it looks like this I will disassemble mine for a pic if I can get to it today..Thanks

 

[TLG]

Don't tear down any further as that looks to possibly work. I have one for reference at home. Will be back home over the weekend. Thx for the pic Joe.

 

[Joe Orapello Jr]

Don't tear down any further as that looks to possibly work. I have one for reference at home. Will be back home over the weekend. Thx for the pic Joe.

Thank you TLG.. I modified a 1117 160 5400 (042/048 Band. Fiddled with it and got it to work, but I had to re-rivet the lever end of the band.
Aluminum rivet so I am not to sure on the strength of that. I appreciate your help.

Thanks
Joe

 

[gggGary]

I found parts to convert this mid run 028WB from a local saw guy with a lot of used stihl saws. I think he got a lot of the "trade in saws" from a dealer.

Some pics, part #s here:
https://www.arboristsite.com/thread...ainsaw-of-all-time.371807/page-2#post-8229063

 

[Joe Orapello Jr]

Thank you Gary. The 028’s are runners for sure. Rebuilt three of them entirely. But this last one has been a parts challenge for sure.

Joe

 

[nheller718]

I've got an aftermarket one, says it replaces 1118 160 5402

 

[DisturbeD]

I believe I have one of these brake bands somewhere in a box of stuff. Not real sure which box of stuff anymore but I'll have a look for it. These do get hard to find but I think I've found 3 over the years and they all sold very fast on ebay.

 

[Joe Orapello Jr]

I believe I have one of these brake bands somewhere in a box of stuff. Not real sure which box of stuff anymore but I'll have a look for it. These do get hard to find but I think I've found 3 over the years and they all sold very fast on ebay.

Thank you DisturbeD
It looks like below.
If you find it message me with price

Best
Joe

 

[DisturbeD]

Thank you DisturbeD
It looks like below.
If you find it message me with price

Best
Joe

Well I searched in all the boxes I thought it be in and have not found it. So not sure where it is at these days. It's been at least a year since I've seen it but it's here someplace. I have too many chainsaws and parts around here.