Want to Sell Stihl bar Extravaganza! Lots of 36 and afew 32". priced at 35 and 40$ plus shipping

[Bill G]

I think its because they require special handling, not conveyor friendly

My wallet does not ask why

 

[david newbie]

I need a 36 inch bar to fit a 2100 Husquvarna and a 32 or a 28 inch to fit a Poulan 655. I think both take the large mount husky bars.

You have anything?

I have a 36' husqvarna large mount, and possibly a 32. However , I am about to leave the country and wont be back til the 17th. btw, shipping long bars is not cheap as there is an extra fee for anything 30 and over I think?

 

[Bill G]

I have a 36' husqvarna large mount, and possibly a 32. However , I am about to leave the country and wont be back til the 17th. btw, shipping long bars is not cheap as there is an extra fee for anything 30 and over I think?

Dimensional weight is most certainly a factor but it does not automatically go up over 30 inches in length.
Here are some real rates from Illinois to Medford Oregon
24" x 6" x 6" 30lbs $41.25
30" x 6" x 6" 30lbs $41.25
36" x 6" x 6" 30lbs $41.25
42" x 6" x 6" 30lbs $41.25

Now if it is 1 inch thick

24" x 6" x 6" 30lbs $54.20
30" x 6" x 6" 30lbs $54.20
36" x 6" x 6" 30lbs $54.20
42" x 6" x 6" 30lbs $54.20

 

[david newbie]

This is what the post office told me , so now I’m confused

 

[fields_mj]

Watching. I have a 28" bar that I normally run, but my next size up is 42", and I hope I never have to use it again.... It would be nice to have a 36" to run on the rare occasion that the 28" isn't enough.

 

[snobdds]

I have a 36' husqvarna large mount, and possibly a 32. However , I am about to leave the country and wont be back til the 17th. btw, shipping long bars is not cheap as there is an extra fee for anything 30 and over I think?

Lets see some pictures of them...

 

[Jacob J.]

Lets see some pictures of them...

I've met up with David several times in person and I can assure you he has a lot of bars. He even asked me to help ID several stacks.

I've bought/traded a lot of stuff with David and he's a super straight shooter.

 

[snobdds]

I've met up with David several times in person and I can assure you he has a lot of bars. He even asked me to help ID several stacks.

I've bought/traded a lot of stuff with David and he's a super straight shooter.

I knew he was a good guy and you vouching for him is even better.

I just want to see what I'm buying before I commit.

 

[david newbie]

Lets see some pictures of them...

Will do if I get the chance before I leave

 

[Bill G]

This is what the post office told me , so now I’m confused View attachment 1240061

I do not use USPS unless I absolutely have to. They are slow and very expensive. They are also not reliable in this area. I have not received mail since last week.

 

[Bill G]

I knew he was a good guy and you vouching for him is even better.

I just want to see what I'm buying before I commit.