Hey guys! I’m wondering if someone is able to give me some help figuring out an issue I am having.
I just picked up a 500i that starts fine, cuts fine but about 50% of the time the saw will die coming back to idle. It can be from free revving or coming out of a cut. The saw starts right back up after.
I did a vacuum and pressure test and found no leaks. Cylinder and piston is in excellent condition. Tank vent is working fine and tank is holding pressure.
I just picked up a 500i that starts fine, cuts fine but about 50% of the time the saw will die coming back to idle. It can be from free revving or coming out of a cut. The saw starts right back up after.
I did a vacuum and pressure test and found no leaks. Cylinder and piston is in excellent condition. Tank vent is working fine and tank is holding pressure.