Struck some gold on ebay tonight

[ForTheArborist]

What CC are those??

 

[mattfr12]

its an homeowner 310 that he put a different motor in i believe and ported it with some other work. 59cc stock i do believe because its a 390 motor. that little home owner saw is making a 440 look weak.

 

[mattfr12]

What CC are those??

he's doing a 362 for me it should be done in the next couple of days stay tuned and check it out.

but the real nasty one is gonna be the 372xp can't tell you whats going in that because i don't want my competition at the races knowing.

 

[ForTheArborist]

I figured they had to be a low CC, but they don't choke or chatter under the load. Noice. I like 'em. They're definitely portted.

 

[Stumpys Customs]

The top one (MS390) is 64cc & the bottom one (MS361) is 59cc.

Here's a vid of the last 372 I done. It has an 8 pin rim & 24''bar.
[video=youtube_share;nELUMRjNSpM]http://youtu.be/nELUMRjNSpM[/video]

 

[Stihlofadeal64]

Here's something to wet the appetite.
[video=youtube_share;gOEO1LTQufg]http://youtu.be/gOEO1LTQufg[/video]
http://www.arboristsite.com/chainsaw/191477.htm

[video=youtube_share;FJBKcWr6nao]http://youtu.be/FJBKcWr6nao[/video]
http://www.arboristsite.com/chainsaw/191043.htm

So the MS310 is actually a MS390 ported? Looks like its pulling a 24" bar.
Stumpy has it going on. Don't think I've seen a clamshell ported (but I'm
still wet around the ears learning about porting). But I'm all eyes watching!
Thanks for posting!

 

[mattfr12]

So the MS310 is actually a MS390 ported? Looks like its pulling a 24" bar.
Stumpy has it going on. Don't think I've seen a clamshell ported (but I'm
still wet around the ears learning about porting). But I'm all eyes watching!
Thanks for posting!

its a 28" bar i do believe and 390 motor.

 

[Stumpys Customs]

So the MS310 is actually a MS390 ported? Looks like its pulling a 24" bar.
Stumpy has it going on. Don't think I've seen a clamshell ported (but I'm
still wet around the ears learning about porting). But I'm all eyes watching!
Thanks for posting!

its a 28" bar i do believe and 390 motor.

Yes it's a 390 motor and a 28" bar with oregon LGX chain

 

[mattfr12]

First saw arrived today runs like a champ.

 

[Stumpys Customs]

First saw arrived today runs like a champ.

Good score buddy.:msp_thumbsup: Those saws can be made to scream too. Just sayin

 

[mattfr12]

Good score buddy.:msp_thumbsup: Those saws can be made to scream too. Just sayin

i am very happy with it runs good out of the box unlike the guy i sent you. but I'm sure this one will be dropped off by the UPS man sooner or later.

 

[Stumpys Customs]

i am very happy with it runs good out of the box unlike the guy i sent you. but I'm sure this one will be dropped off by the UPS man sooner or later.

It ran ok. It outta run a lil better when I get it done. Workin on the cyl right now.

 

[treemandan]

its an homeowner 310 that he put a different motor in i believe and ported it with some other work. 59cc stock i do believe because its a 390 motor. that little home owner saw is making a 440 look weak.

It is?:msp_confused:

Not for nothing but there must be something wrong with the chain. Is it supposed to jump around like that? I'm sorry, I know I am an ass hole, I know I am very paranoid, I know I never have anything good to say BUT my stock 44's seem to be much smoother and just as quick if not quicker. I don't know though, it did better than my 26.

 

[mattfr12]

It is?:msp_confused:

Not for nothing but there must be something wrong with the chain. Is it supposed to jump around like that? I'm sorry, I know I am an ass hole, I know I am very paranoid, I know I never have anything good to say BUT my stock 44's seem to be much smoother and just as quick if not quicker. I don't know though, it did better than my 26.

the video is more just to show what he can make a saw do took a little 300.00 saw and made it pull a 440 044 bar. you gotta admit thats a lot of power increase i doubt without the mods it would pull it in any wood. your 440 might be faster but that thing stock wouldn't even be close.

he's almost done with my 362 ill post the link in here when i get it well see what he pulled out of that puppy.

 

[Stumpys Customs]

It is?:msp_confused:

Not for nothing but there must be something wrong with the chain. Is it supposed to jump around like that? I'm sorry, I know I am an ass hole, I know I am very paranoid, I know I never have anything good to say BUT my stock 44's seem to be much smoother and just as quick if not quicker. I don't know though, it did better than my 26.

Yah that chain is a lil aggressive and about to the end if it's life. I need to work on the rakers to smooth the chain out.

 

[Stumpys Customs]

Matt wanted me to post a link to the thread on his MS362 in here so here it is.
http://www.arboristsite.com/chainsaw/192088.htm

 

[mattfr12]

Matt wanted me to post a link to the thread on his MS362 in here so here it is.
http://www.arboristsite.com/chainsaw/192088.htm

ya might as well show the rest of the forum what you can do theirs a lot of guys out their that are not happy with the 362's stock performance.

 

[Stumpys Customs]

ya might as well show the rest of the forum what you can do theirs a lot of guys out their that are not happy with the 362's stock performance.

Keep an eye on the thread. Vids will be up this afternoon.
I think you'll be happy with it.

 

[mattfr12]

Heres stumpy's phenomenal work 28" bar on 362. ill let stumpy post the rest got excited so i figured id throw this one up.

http:/http://www.youtube.com/watch?v=wssvWspAMYE&feature=g-u-u&context=G2a4234eFUAAAAAAAAAA/

 

[Stumpys Customs]

Here's all the vids.

Stock 7pin rim
[video=youtube_share;Lq8Ep84FRcw]http://youtu.be/Lq8Ep84FRcw[/video]

Ported 7pin rim
[video=youtube_share;PbEM-Bnk_o4]http://youtu.be/PbEM-Bnk_o4[/video]

Ported 8 pin rim
[video=youtube_share;RD4UJuj7pEQ]http://youtu.be/RD4UJuj7pEQ[/video]

Ported 28'' bar
[video=youtube_share;wssvWspAMYE]http://youtu.be/wssvWspAMYE[/video]