Sure is quiet in here....do I need to start a fight?

[Cantdog]

Morning All....Trailer work completed yesterday morning......then 6 hrs more laying on my back sanding overhead......I was blue as a smurph when I got done!!!!
Bottom Paint goes on today!!!

Dan...having a sale on "experienced" saltwater brakes.....whole setup..,,works good.....nearly fixable condition!! CHEEP!!!!

 

[stihl023/5]

Morning. Nice work on the trailer.

 

[Cantdog]

Morning. Nice work on the trailer.

Thanks.....hasn't been road tested yet with a load on it......hopefully it will work as designed......

 

[pioneerguy600]

No fears, since you didn`t move or adjust the axles and walking beams there shouldn`t be any difference except the trailer will stop now with its new shiny brakes that work....LOL

 

[pioneerguy600]

Beauty of a day here, got some firewood that needs splitting n piling, time to get it done.

 

[Cantdog]

No fears, since you didn`t move or adjust the axles and walking beams there shouldn`t be any difference except the trailer will stop now with its new shiny brakes that work....LOL

Yep.....that's the plan....

 

[tbone75]

Looks good as new Robin !

 

[dancan]

GeeHeyzus , first time I've seen that much hose all for brakelines , the ones I've had the pleasure of working on were stainless , hope you saved the hoses LOL

 

[Cantdog]

GeeHeyzus , first time I've seen that much hose all for brakelines , the ones I've had the pleasure of working on were stainless , hope you saved the hoses LOL

240" master to tee......24" tee to left wheel....72" tee to right wheel... ain't savin' nuthin'...LOL!!.......though the actuator would do some more work with a new shock absorber.........ain't actually toss anything yet.....

 

[pioneerguy600]

240" master to tee......24" tee to left wheel....72" tee to right wheel... ain't savin' nuthin'...LOL!!.......though the actuator would do some more work with a new shock absorber.........ain't actually toss anything yet.....

 

[pioneerguy600]

All those parts look salvageable , a little cleanup, new seals and maybe check the bearings, may need new shoes and a few parts but rebuildable .

 

[Cantdog]

All those parts look salvageable , a little cleanup, new seals and maybe check the bearings, may need new shoes and a few parts but rebuildable .

Yep.....new shoes, probably wheel cyls, turn the drums, new bearings and races/seals.....new or free up the adjusters....be good for a trailer that didn't need to go swimming ....in the end probably just as cheap to just buy a new kit complete....that wasn't rusty...

 

[tbone75]

Yep.....new shoes, probably wheel cyls, turn the drums, new bearings and races/seals.....new or free up the adjusters....be good for a trailer that didn't need to go swimming ....in the end probably just as cheap to just buy a new kit complete....that wasn't rusty...

Cheaper in the long run to buy new .

 

[Cantdog]

Cheaper in the long run to buy new .

Yep......goes against everything hold dear...and my upbringing.....but true....and easier to boot!!!

 

[tbone75]

Yep......goes against everything hold dear...and my upbringing.....but true....and easier to boot!!!

MUCH easier ! LOL

 

[stihl023/5]

Cheaper in the long run to buy new .

Yep sometimes you just have to punt.

 

[Cantdog]

As Danny would say.........Shazam!!!!!!

 

[pioneerguy600]

Fresh water so much easier, just a good coat of wax. Hope the antifouling keeps the marine growth at bay.

 

[El Moobs]

I once owned a Classic Motorboat that had that same hull design.

Hi Robin, Jerry, John, etc......

 

[pioneerguy600]

I once owned a Classic Motorboat that had that same hull design.

Hi Robin, Jerry, John, etc......

He buddy, didn`t know Tenn had any water big enough for boats.