think I have some 51/55 parts, Ill get back to you in the AM. and If i dont, well...A reminder would be well.. I should have the choke and throttle rods.... But that clutch cover... they all get torn apart here!
Swap meet...
- Thread starter Four Paws
- Start date
Help Support Arborist Forum:
350jeepcj5
ArboristSite Operative
got the case half covered...
still need a tank/handle assembly for a 038 super 2
still need a tank/handle assembly for a 038 super 2
TonyRumore
ArboristSite Guru
I need an air filter hanger/mount/tree for an 044.
nmurph
ArboristSite.com Sponsor
- Joined
- Nov 26, 2007
- Messages
- 16,162
- Reaction score
- 7,168
372
I need a 372 chainbrake handle and a half-wrap. Holler if you have one.
I need a 372 chainbrake handle and a half-wrap. Holler if you have one.
Mastermind
Work Saw Specialist
Hunting a 346 muffler brace.......please. 
Nardoo
Addicted to ArboristSite
Wanting to swap a 51 clutch cover with working brake for a muffler to fit a Dolly 6000i (120S, 120Si etc). Would ideally suit a Vietnam vet....
Al.
Al.
Scooterbum
Addicted to ArboristSite
Thanks Tony, I'll have to look and see which one it is.
Who would have ever thought Stihl would have 2 different parts for the same saw?
Scooterbum
Addicted to ArboristSite
Checking today to see. Also will be going through the 075 stuff for you.
If you haven't made a deal on the Husky 44 I maybe interested. I'm also going to check that long bar I have hanging out there. I know it's .404, just not sure of mount. I'm thinking I had it on the 056mag II.
Mastermind
Work Saw Specialist
Wanting to swap a 51 clutch cover with working brake for a muffler to fit a Dolly 6000i (120S, 120Si etc). Would ideally suit a Vietnam vet....
Al.
Done. The cover I have is in very nice condition too......(just dug it out).
sefh3
Addicted to ArboristSite
Is this for an older 020AV (metal crankcase) or a new MS200 (plastic crankcase)?
Scooterbum
Addicted to ArboristSite
It's for an older 020AVS rear handle with electronic instead of points.
JonseredS 490 with heated handles
Got to many saws in the same size that are not going to get used.
Notice this one is JonseredS and not just Jonsered which makes it a little rarer from my research.
1982 Jonsered-S jonsered 490 with heated handles. Topend looks like brand new with crosshatch and witness lines etc.
Story: Basically a new saw still that was bought new by Marcel Vincent and then sold to another racer builder then to another and then I saved it before being butchered into a 3 cube race saw.
It just sets on my shelf and gets run at gtg's or comparison testing only since I have owned it. I bought it PHO = power head only. I found a 325 jonsered bar and put on it and a old jonsereds bar cover for it.
Just like to see someone get use or that collects saws to give this saw a home. It is just not going to get used here.
PM me with trade offers or wanting a more info.
Got to many saws in the same size that are not going to get used.
Notice this one is JonseredS and not just Jonsered which makes it a little rarer from my research.
1982 Jonsered-S jonsered 490 with heated handles. Topend looks like brand new with crosshatch and witness lines etc.
Story: Basically a new saw still that was bought new by Marcel Vincent and then sold to another racer builder then to another and then I saved it before being butchered into a 3 cube race saw.
It just sets on my shelf and gets run at gtg's or comparison testing only since I have owned it. I bought it PHO = power head only. I found a 325 jonsered bar and put on it and a old jonsereds bar cover for it.
Just like to see someone get use or that collects saws to give this saw a home. It is just not going to get used here.
PM me with trade offers or wanting a more info.
fastLeo151
Addicted to ArboristSite
Do you need just the flag or the whole side cover? I have the whole thing.
Last edited:
husqvarnaguy
Addicted to ArboristSite
I know its not a saw but does anyone know where I can get some Ford 3910 tractor parts.
tmessenger
ArboristSite Guru
I found one for my 044 build at Chainsawr.com a few weeks ago I think I paid $15 for it you might give them a call and see if they have any more.
TIm
sefh3
Addicted to ArboristSite
Here is what I have. Will this work? PM me your address if it will. It's from an 020AV.
Heres my lot of 'stuff' to unload.
74 DL of .325 .063 oregon chain
Its got 22 on the driver, and 25 on the raker. used
Oregon EW 160xxxd009 16"? 3/8" sprocket nose VERY light use.
Oregon 180SLGK095 .050 .325x72DL hardnose, NEW
372 flywheel, slight rub marks, but usable
359 flywheel, Great used.
066 carb (parts)
And a lot of 5 or 6 zama and walbro carbs and pieces.
Looking to trade the carbs as one lot for a WT194
Otherwise.. Whatta ya got!? I have more small stuff to go through tomorrow!
Pm would be Ideal, but Ill check here aswell!
Thanks guys!!!
74 DL of .325 .063 oregon chain
Its got 22 on the driver, and 25 on the raker. used
Oregon EW 160xxxd009 16"? 3/8" sprocket nose VERY light use.
Oregon 180SLGK095 .050 .325x72DL hardnose, NEW
372 flywheel, slight rub marks, but usable
359 flywheel, Great used.
066 carb (parts)
And a lot of 5 or 6 zama and walbro carbs and pieces.
Looking to trade the carbs as one lot for a WT194
Otherwise.. Whatta ya got!? I have more small stuff to go through tomorrow!
Pm would be Ideal, but Ill check here aswell!
Thanks guys!!!
Hey Randy!
I found you a throttle rod! No luck on the choke lever though! I do have a pawl-less flywheel, and your 650 Super cylinder waiting for some spare change to ship! You need any 372 plastic? I have that and a gutless clutch cover if your interested! Im still working on getting a saw to send your way! Itll be a 70.7 ccs hopefully!
Bump
helping
I am trying to help a friend out and get him a little bigger saw i would like to find a project . I would like to get somthing husky , in the 60 cc,s range , just droppin a line to see what comes up .
I am trying to help a friend out and get him a little bigger saw i would like to find a project . I would like to get somthing husky , in the 60 cc,s range , just droppin a line to see what comes up .
