Swap meet...

[psuiewalsh]

3120 parts

Looking for parts for a husky 3120xp. A muffler bracket and possibly muffler. Also looking for clutch side sealing parts between the clutch and the oiler. Have parts, chains, bars and funds to trade.

 

[RedneckChainsawRepair]

Hey guys,

I'm finding myself needing an Oregon 160SPEA095 bar and am having a hard time finding one.
Not looking for a freebie, am willing to pay reasonable$$$.

This is the 16" .050 3/8ths LP bar in a KO95 mount.


Any help would be appreciated.


Mike

copy and pasted saw info

Just to help find. Heck I may have one. I find it odd the poulan 325 was on the list for this bar. :msp_blink:

You can take a A041 and convert it with oblonging the bar adjuster holes and drill oil holes.


160SPEA095 56 drive links of 3/8" pitch x .050" gauge low profile chain Pro 91 $36 new





Fits the following chainsaws:

Alpina/Castor A-40, C-40, CP-41, CP-45, CP-540, CP-600, P-370, P-410, P-460, P510, PRO-41, PRO-45, PRO-540, PRO-600

Cub Cadet CS5018, CS5220, CS5720

Dolmar 109, 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, 120, 120si, 120 SUPER, PS-5100, PS-6800

Homelite 30, 130, 150, 150 A0, 250, 252, 290, 300, 340, CS 40, CS 50, EZ 250, MINI SL, SUPER EZ A0, XL-76, XL-100 SERIES

Husqvarna 33, 36, 38, 40, 41, 42, 44, 45, 49, 50, 51, 55, 55 Rancher, 57, 133, 136, 140, 141, 154, 234, 238, 240, 242, 246, 254, 257, 261, 262, 335, 336, 338, 339, 340, 345, 346, 350, 351, 353, 357, 359, 360, 362, 444, 445, 450, 455 Rancher, 460, 1400, 1600

John Deere CS46, CS52, CS56, CS62

Jonsered 45, 49, 50, 51, 52, 370, 410, 420, 425, 435, 450, 451, 455, 490, 510, 520SP, 521, 525, 535, 590, 941, 2050, 2051, 2054, 2055, 2063, 2141, 2145, 2149, 2149 TURBO, 2150, 2152, 2159

Makita DCS 430, DCS 431, DCS 520i, DCS 5200i, DCS 6000i

Maruyama POLESAWS: MC-PL11, MC-PS11

McCulloch 1849 AV, 2046 AV, 2049 AV, 4600, 4700, 4900, 5000, 5500, MS 1434, MS 1436, MS 1636, MS 1839, MS 1846, MS 1849, MS 1850, MS 2046, MS 2049, MS 2050, PM 1845 AV,Pro Mac: 40, 46; Silver Eagle: 2818, 3020; Timber Bear, Timber Bear 20

Olympyk (Oleo-Mac) 941, 945, 950, 951

Partner 410, 510, 540, P-360, P-400, P-450, P-500, P-5000

Pioneer 1074, P-21, P-26, P-28

Poulan 325

Redmax G390, G450AVS, G455AVS, G3800

Sears 35084, 35201

Solo 614, 630, 631, 632, 636, 638, 639, 641, 644, 645, 647, 650, 651, 651 SP, 654, 656

Stanley CS05, CS06

 

[Adirondackstihl]

028 AV Super

Looking for any of the following parts:

1) Air filter cover
2) Clutch cover
3) Rear handle cover w/ operator presence lever
4) Carb
5) Ignition harness
6) Air filter

Any help is appreciated.

Thanks
Jeremy

 

[SawGarage]

Hey guys,

I'm finding myself needing an Oregon 160SPEA095 bar and am having a hard time finding one.
Not looking for a freebie, am willing to pay reasonable$$$.

This is the 16" .050 3/8ths LP bar in a KO95 mount.


Any help would be appreciated.


Mike

Mike,

I'm almost positive I have one of these hanging in the shop unused....

I'll shoot you a PM


J

 

[RedneckChainsawRepair]

I have some saws I have lost interest in and dont plan on putting back together, others are together and running and cutting. Just clearing out some series of saws I dont want on my shelves anymore. Open to trades of ??? or ? Just PM me with your ideas.

Poulan S25DA needs put back together. Saw wasnt running when came into me on trade for my labor working on a saw for a guy. Tore it down and just never got back around to it.

Homelite XL2 older one with metal case, needs put back together. Needs carb kit and fuel line. Runs all day while squirting mix in carb. Have paperwork where bought new in 1980 with red case.

Homelite XL 1 owner till it came in trade. Has primer bulb fuel cap that is cracked, but it is not needed as it starts and runs and cuts fine. Might need a carb kit down the road.

Poulan Pro 236 builder, starts but has issue with seals and crank bearings. (trade is being worked out on this one right now) but just in case.

Poulan 1800 runs and cuts. Came in trade on a bigger saw.


Poulan s25da with red name tag in pic. Is disassembled now. Never pulled c+p etc though, just short blocked.

XL2 disassembled now. Just needs carb kit and fuel line.

XL

Poulan 236 needs rebuilt

Poulan 1800 runs cuts

 

[bplust]

I would really really like a clutch cover / brake assembly for a Shindaiwa 575. I have one that's just about cherry, but is missing the brake assembly.

I have parts or paper to trade.

Thanks in advance,

Bryan

 

[jbighump]

needing a handlebar and the whole recoil assembly for a stihl 034 av,, and a good useable cylinder for a stihl 036 pro have a bunch of 029 series parts pm me with what u have or I always have cash

 

[Mo. Jim]

needing a handlebar and the whole recoil assembly for a stihl 034 av,, and a good useable cylinder for a stihl 036 pro have a bunch of 029 series parts pm me with what u have or I always have cash

I have a 034 recoil that I would trade for a 029 recoil.

 

[turbo885]

Anyone have an extra 066 poly flywheel
thanks BILL

still needing a flywheel thanks BILL

 

[Adirondackstihl]

Looking for any of the following parts:

1) Air filter cover
2) Clutch cover
3) Rear handle cover w/ operator presence lever
4)
5) Ignition harness
6) Air filter

Any help is appreciated.

Thanks
Jeremy

Bump!!

Surely someone has an 028 parts saw AND is willing to part with a few things?!

The carb I have is usable.

 

[cutforfun]

Looking for a usable Stihl ms310 piston, rings would be a bonus, have cash and some trades.

 

[mp5n]

Looking for a MS200T top handle

Looking for a top handle and the handle side cover for a Stihl MS200T. If anyone can help out please PM.

Thanks in advance,
MP5N

 

[cat-face timber]

Looking for a Husky 288 (or whatever will work) Piston/Cylinder, Carb, carb boot. misc screws/hardware.


I have some Stihl Parts (050 AV), some Mac (6xx series) parts and some moldy green paper.

Please send me a PM.

thanks!

Bump...

 

[blueberrymuzik]

MS55 Yard Boss Carburetor

I'm looking for a carburetor for a Stihl MS55 Yard Boss. Have green stamps for trade. I suspect that a carb from a FS55 trimmer would also work.

 

[Junorr500]

Cd 2100

Looking for a chain tensioner bolt and tabs for a CD2100.

 

[RedneckChainsawRepair]

Wanted MS440 tank

Wanted for customers saw. Looking for a MS440 tank for one that lost a battle with a tree over the weekend. Like new firewood saw at that, boy the owner dropping it off wanted to cry.

 

[epicklein22]

still needing a flywheel thanks BILL

Bill, I think I have an extra or two. Will take a look this week.

 

[epicklein22]

I would really really like a clutch cover / brake assembly for a Shindaiwa 575. I have one that's just about cherry, but is missing the brake assembly.

I have parts or paper to trade.

Thanks in advance,

Bryan

PM Rookie1, I gave him a couple parts saws when I was cleaning up my shop a bit. He's a busy guy, so be patient.

 

[turbo885]

Bill, I think I have an extra or two. Will take a look this week.

Thanks let me know
BILL

 

[Duke Thieroff]

View attachment 302144View attachment 302145View attachment 302146

I have 5 of these, I believe they are all rebuilders. They are all in similar condition and not too beat on.

I have not tested them, but would be willing to look at whatever needs looked at on em.

Willing to trade for chainsaws, chainsaw related stuff. Guns, ammo, canned goods, baby formula and diapers also welcome.

Also will take cash, check money order or PayPal, no ObamaBucks accepted here, though.

D00k