Swap meet...

[o8f150]

What's the length on the Stihl bars? And how much?

ooopppssss sorry,,,,, FREE!!!!!!!,, they are 16"

 

[cgraham1]

ooopppssss sorry,,,,, FREE!!!!!!!,, they are 16"

I'm a little slow... Will these fit an 026? If so, I'll take one! Thanks!

 

[o8f150]

I'm a little slow... Will these fit an 026? If so, I'll take one! Thanks!

i believe the 026 is a large mount,,,,, if i am wrong someone please correct me,,, if it is a small mount i will be more then happy to send you one

 

[cgraham1]

026 is the same as an 066, so I guess that's large mount. Thanks anyways!

 

[Guido Salvage]

Yes, Want some 757 plastics?

Is that all you have for the 757? As I recall the saw has 140 PSI but I can check.

 

[cutforfun]

looking for a coil for a mcculloch 610, there were other saws with the same coil, 605, timber bear, eager beaver 3.7 . let me know what your looking for. Trying to help out a friend.

 

[Big_Wood]

ok,,, figured i would give you guys a chance to make use of these ,,FREE FOR THE ASKING!!!!!!!!!!!!!!!!!!!!!!! remember i closed my shop and sold most everything off,, i found these today,,,,,,,,,the gb bars are small mount stihls,, 16" hard nose and 50 gauge,,i have 3 of them,,,, the mccullochs are 16" sprocket nose and 50 gauge and i have 2 of them,,,,, now the rims,,,,,the x small(what i call them) i have a 325/7 and a stihl p-7,,,,,,,, mediums i have a 1/4 9 and 2 of the 325/7's,,,, large is a 3/8 8,,,,i believe all the rims but the 1/4 are new,, if you want them claim them,,,,,, please make a reply on here so that way its a bit easier for me to keep track and everyone else knows what is claimed,,,,,, once you claim it on here with a post them send a pm with addy,,,,,,,, i am going to charge everyone a flat 100.00 for shipping of each item,,,,JUST KIDDING MIDGETS,,DONT GET YOUR PANTIES IN A BUNCH,,,,,,shipping is on my dime as long as its to the lower 48 with usps

View attachment 360385 View attachment 360387

i would be down with those rims scott

 

[psuiewalsh]

Is that all you have for the 757? As I recall the saw has 140 PSI but I can check.

Yes , the saw went to another member.

 

[psuiewalsh]

ooopppssss sorry,,,,, FREE!!!!!!!,, they are 16"

Id like to try one if left.
Keith

 

[o8f150]

Id like to try one if left.
Keith

PM me your addy keith,,, i can have it heading your way tomorrow

 

[o8f150]

the rims are spoken for and 1 of the stihl mount bars is spoken for,,,,,,,,,,,ok,,, figured i would give you guys a chance to make use of these ,,FREE FOR THE ASKING!!!!!!!!!!!!!!!!!!!!!!! remember i closed my shop and sold most everything off,, i found these today,,,,,,,,,the gb bars are small mount stihls,, 16" hard nose and 50 gauge,,i have 3 of them,,,, the mccullochs are 16" sprocket nose and 50 gauge and i have 2 of them,,,,, now the rims,,,,,the x small(what i call them) i have a 325/7 and a stihl p-7,,,,,,,, mediums i have a 1/4 9 and 2 of the 325/7's,,,, large is a 3/8 8,,,,i believe all the rims but the 1/4 are new,, if you want them claim them,,,,,, please make a reply on here so that way its a bit easier for me to keep track and everyone else knows what is claimed,,,,,, once you claim it on here with a post them send a pm with addy,,,,,,,, i am going to charge everyone a flat 100.00 for shipping of each item,,,,JUST KIDDING MIDGETS,,DONT GET YOUR PANTIES IN A BUNCH,,,,,,shipping is on my dime as long as its to the lower 48 with usps

View attachment 360385 View attachment 360387

the rims are spoken for and 1 of the stihl mount bars is spoken for

 

[PogoInTheWoods]

I would certainly put those Mac bars on well-deserving saws if they're still available!

 

[xtremez]

ok,,, figured i would give you guys a chance to make use of these ,,FREE FOR THE ASKING!!!!!!!!!!!!!!!!!!!!!!! remember i closed my shop and sold most everything off,, i found these today,,,,,,,,,the gb bars are small mount stihls,, 16" hard nose and 50 gauge,,i have 3 of them,,,, the mccullochs are 16" sprocket nose and 50 gauge and i have 2 of them,,,,, now the rims,,,,,the x small(what i call them) i have a 325/7 and a stihl p-7,,,,,,,, mediums i have a 1/4 9 and 2 of the 325/7's,,,, large is a 3/8 8,,,,i believe all the rims but the 1/4 are new,, if you want them claim them,,,,,, please make a reply on here so that way its a bit easier for me to keep track and everyone else knows what is claimed,,,,,, once you claim it on here with a post them send a pm with addy,,,,,,,, i am going to charge everyone a flat 100.00 for shipping of each item,,,,JUST KIDDING MIDGETS,,DONT GET YOUR PANTIES IN A BUNCH,,,,,,shipping is on my dime as long as its to the lower 48 with usps

View attachment 360385 View attachment 360387

Id be interested in one of the stihl mount bars if there's any left.

 

[xtremez]

Anybody want this? The cover was junk...
View attachment 360371

How much $$ for the id plate?

 

[jerrycmorrow]

ok,,, figured i would give you guys a chance to make use of these ,,FREE FOR THE ASKING!!!!!!!!!!!!!!!!!!!!!!! remember i closed my shop and sold most everything off,, i found these today,,,,,,,,,the gb bars are small mount stihls,, 16" hard nose and 50 gauge,,i have 3 of them,,,, the mccullochs are 16" sprocket nose and 50 gauge and i have 2 of them,,,,, now the rims,,,,,the x small(what i call them) i have a 325/7 and a stihl p-7,,,,,,,, mediums i have a 1/4 9 and 2 of the 325/7's,,,, large is a 3/8 8,,,,i believe all the rims but the 1/4 are new,, if you want them claim them,,,,,, please make a reply on here so that way its a bit easier for me to keep track and everyone else knows what is claimed,,,,,, once you claim it on here with a post them send a pm with addy,,,,,,,, i am going to charge everyone a flat 100.00 for shipping of each item,,,,JUST KIDDING MIDGETS,,DONT GET YOUR PANTIES IN A BUNCH,,,,,,shipping is on my dime as long as its to the lower 48 with usps

View attachment 360385 View attachment 360387

Hey Scott,
I'd like to have one of those GB bars. Hadn't heard about you closing yer shop. Hope it was voluntary. I bet all the local elderly are gonna miss you.

 

[Guido Salvage]

Yes , the saw went to another member.

Air filter decent?

 

[psuiewalsh]

Air filter decent?

I would use it.

 

[o8f150]

ok,,, figured i would give you guys a chance to make use of these ,,FREE FOR THE ASKING!!!!!!!!!!!!!!!!!!!!!!! remember i closed my shop and sold most everything off,, i found these today,,,,,,,,,the gb bars are small mount stihls,, 16" hard nose and 50 gauge,,i have 3 of them,,,, the mccullochs are 16" sprocket nose and 50 gauge and i have 2 of them,,,,, now the rims,,,,,the x small(what i call them) i have a 325/7 and a stihl p-7,,,,,,,, mediums i have a 1/4 9 and 2 of the 325/7's,,,, large is a 3/8 8,,,,i believe all the rims but the 1/4 are new,, if you want them claim them,,,,,, please make a reply on here so that way its a bit easier for me to keep track and everyone else knows what is claimed,,,,,, once you claim it on here with a post them send a pm with addy,,,,,,,, i am going to charge everyone a flat 100.00 for shipping of each item,,,,JUST KIDDING MIDGETS,,DONT GET YOUR PANTIES IN A BUNCH,,,,,,shipping is on my dime as long as its to the lower 48 with usps

View attachment 360385 View attachment 360387

ok guys,,, everything is spoken for,,,, thanks for the interest

 

[surfincr]

looking for a cylinder for a 036, have a bunch of 026/260 parts, along with some 021/025 parts or cash

 

[GMAK]

I'm in need of an 064 cylinder. I've got a MS660 jug I would trade......

I may have an 064 cylinder, not sure, found it in the shop when I bought the place. I don't much need a MS660 jug though... What #'s should I be looking for on the cylinder?