Swap meet...

[tomdcoker]

I have a complete 009L saw with bar and chain, that could use the pull cord replaced, and a carb kit installed. It ran decent, but was always a little cold blooded to get started. A carb kit in a bag is included with the saw.

I could use a used 32" to 36" stihl bar with a chain (3/8 or .404) to fit a 066 stihl.

Or, a new piston and ring for an 034av-super might work also.

Anyone interested in a project?

If you do not get a trade I may be interested in a buy or trade. I do not have any of the items you reqyested, but I have other items to trade. P M me if the trade does not work out. Thanks Tom

 

[biggenius29]

066/660 flywheel

I am in need of a aluminum 066/660 flywheel to finish off my 064 build. Any leads would me much appreciated.

 

[Madsaw]

Looking for some 1/2 chain for a young friend. He does not have much $$, with going to college and helping his dad with tree work he is strapped a bit. So I figured if I could do some dealing on chain for him I would help him out. Its not often to find young folks into old saws and tractors. He is suppose to get a driver count and gauge for me.
Thanks
Bob

 

[Jacob J.]

I got some decent 1/2" chipper and semi-chisel here that I can help out with. I've two other members needing loops and so I want to cut some for everyone that needs it at the same time. I've got a 100' of the semi-chisel and almost that much in the chipper.

 

[Madsaw]

Thanks JJ,
I will get him to get me a count. Its going on a nice Strunk Eager Beaver. He might help out at our antique show here this yr. He went home with a nice Clinton yesterday. I think it was the D 35 with a nice roller nose.
Bob

 

[Jacob J.]

Thanks JJ,
I will get him to get me a count. Its going on a nice Strunk Eager Beaver. He might help out at our antique show here this yr. He went home with a nice Clinton yesterday. I think it was the D 35 with a nice roller nose.
Bob

The Clintons are easy enough to find .404 spur sprockets for especially if he has a roller nose but the Strunks are a different animal. Yeah, once you get the driver count I'll spin him a loop.

 

[mowoodchopper]

372 xp , big dogs, mm, woods ported. I just posted this saw in the trading post. I have to many 70cc saws and need a 90 cc . Pm if you have somthing to trade. The 372 is a low hour saw 20-25 tanks looks new inside.

 

[stihlboy]

I am in need of a aluminum 066/660 flywheel to finish off my 064 build. Any leads would me much appreciated.

you need an early 066 flywheel, there were no 660 models with it

 

[warjohn]

I am looking for a Dolmar 100, 101, or 104 hobby. It will be a birthday present for my son Bigjohnston. It does not have to be running but that would be nice.

 

[little possum]

Anybody have a spare 2100 top cover and/or 394 top cover and filter cover they would like to trade on?

 

[54stude]

The 009L is spoken for.

I have a complete 009L saw with bar and chain, that could use the pull cord replaced, and a carb kit installed. It ran decent, but was always a little cold blooded to get started. A carb kit in a bag is included with the saw.

 

[warjohn]

I am looking for a Dolmar 100, 101, or 104 hobby. It will be a birthday present for my son Bigjohnston. It does not have to be running but that would be nice.

I no longer need this I bought him a KMS4 instead.

 

[sefh3]

Stihl 032 Carb

I'm looking for a carb for this saw. I picked this saw up last night but there is no carb on it. If someone has one, PM me. I do have some stuff to trade or $$$

 

[Busmech]

281 husky

I need a gas tank and maybe some other parts for a friends 281.

 

[hoss]

i still have a very strong running homelite 750 with a 32" sprocket nose homelite branded bar and almost new .404 chisel chain to trade. I have tracked down most of my wanted list, but would be interested in an alpina 120, west bend 820 motored chainsaw or contra s or gs. For it to be a straight up trade the saws would have to be in strong running condition. Not so worried about looks as long as there are no breaks.

bump

 

[stihlboy]

matt has a couple big stihls
but i think his are mainly 090G

 

[Harzack223]

Looking for an 048 super in any condition, ever since I sold my 048 I've been kicking myself and what better way to repay myself then look for a super.

 

[stihlboy]

Looking for an 048 super in any condition, ever since I sold my 048 I've been kicking myself and what better way to repay myself then look for a super.

i have an 042 bottom end over here........

you could build it up

 

[Harzack223]

That would be a lot of work with hard to find parts, I might have to go that route someday but hopefully not.

 

[stihlboy]

That would be a lot of work with hard to find parts, I might have to go that route someday but hopefully not.

it needs a P&C , plastics, and a few small things