Swap meet...

[SawGarage]

Matt,

Wow....

that's all I have to say....

I truely wonder if there's anything at all around here with anything of the sort of 090 heritage, or even 064+...but everytime I mention that/think that, another 80cc saw pops up....

 

[ckelp]

the only 090 i seen around here was this:
http://sfbay.craigslist.org/nby/tls/1742775459.html

 

[Teddy.Scout]

Matt,

Wow....

that's all I have to say....

I truely wonder if there's anything at all around here with anything of the sort of 090 heritage, or even 064+...but everytime I mention that/think that, another 80cc saw pops up....

Your in a beter neck of the woods then me!
Timbering is still prevalent up that way compared to our stick cutting here!
Lee is a good example of the finds your way! LOL!!!!

the only 090 i seen around here was this:
http://sfbay.craigslist.org/nby/tls/1742775459.html

ckelp! You are were the Bride won't let me move to!!!! You should be digging them old timber saws out from the camp sites and barns!!!! LOL!

BOOTS ON THE GROUND! (keep in mind I am a good marcher! NOT A FIGHTER!)

 

[SawGarage]

Your in a beter neck of the woods then me!
Timbering is still prevalent up that way compared to our stick cutting here!
Lee is a good example of the finds your way! LOL!!!!



ckelp! You are were the Bride won't let me move to!!!! You should be digging them old timber saws out from the camp sites and barns!!!! LOL!

BOOTS ON THE GROUND! (keep in mind I am a good marcher! NOT A FIGHTER!)

hmmm....

I guess I better be searching a bit better...

although I can't complain...I do get impatient and anxious...

since mid March I've found:

790 Mac (couldn't believe that was up here....lol)
133 Dolmar (Well, 2...one in parts..)


Out West, those should be everywhere...all the good stuff on ebay is from N Cali, Oregon/Washington, etc..

 

[Teddy.Scout]

i can say it now, since i hit my surrounding area, but go to the library and get old phone books. Look up the saw shops, small engine shops, and pre 980 they actually listed 2-cycle shops. I called every number and went to 99% of the addresses! It was amazing as to the leads and finds i have come across!!!!

again!!!!!!

 

[surfincr]

this is probably a long shot but worth a try, looking for a rewind spring for a sears 2.1 chainsaw or even if someone has a spare saw or knows where i can find one. (and yes i do know the saw probably isnt worth repairing but i figured i would try to replace the spring and see if she fires and if not it gets passed along to the next person)

 

[chainsawwhisperer]

this is probably a long shot but worth a try, looking for a rewind spring for a sears 2.1 chainsaw or even if someone has a spare saw or knows where i can find one. (and yes i do know the saw probably isnt worth repairing but i figured i would try to replace the spring and see if she fires and if not it gets passed along to the next person)

Is that the poulan Top handle saw?
I most likely have one.

Jim

 

[sefh3]

this is probably a long shot but worth a try, looking for a rewind spring for a sears 2.1 chainsaw or even if someone has a spare saw or knows where i can find one. (and yes i do know the saw probably isnt worth repairing but i figured i would try to replace the spring and see if she fires and if not it gets passed along to the next person)

I have one from a Green Poulan, PM me your address. I'll send it to you.

 

[chainsawwhisperer]

I have one from a Green Poulan, PM me your address. I'll send it to you.

My Green Poulan spring is better LOL
Jim

 

[surfincr]

it is the top handled model, sending pm as well

 

[sefh3]

My Green Poulan spring is better LOL
Jim

You type faster than me.

 

[roncoinc]

Shindiawa ignition

Looking for ignition parts to fit a nice 345..a member sent me the parts but for the wrong model saw after all the trouble he went thru..
the 345 takes the three piece ignition..
got a 500 parts saw if interested.
tnx..

 

[chainsawwhisperer]

Looking for ignition parts to fit a nice 345..a member sent me the parts but for the wrong model saw after all the trouble he went thru..
the 345 takes the three piece ignition..
got a 500 parts saw if interested.
tnx..

Tri955 has my old 345. The ignition was bad on it, but I do not know what ignition component. It might have the part you need.???
Jim

 

[SawGarage]

Looking for ignition parts to fit a nice 345..a member sent me the parts but for the wrong model saw after all the trouble he went thru..
the 345 takes the three piece ignition..
got a 500 parts saw if interested.
tnx..

500 who?

will the 350 ignition work?

 

[chainsawwhisperer]

500 who?

will the 350 ignition work?

As far as I know, the 345 ignition is exclusive to that saw.

 

[DSS]

500 who?

will the 350 ignition work?

350 won't work, thats what I sent him. I have a 350 parts saw if anyone needs anything.

 

[sefh3]

350 won't work, thats what I sent him. I have a 350 parts saw if anyone needs anything.

How is the piston and cylinder?

 

[GrizzlyAdams86]

I wanna thank GrizzlyAdams86 for hooking me up with a real nice used air filter for my husky 77. It will be a big help getting this build finished.

You are welcome. If you need anymore parts, give me a holler. I'll see what I can do.

 

[SawGarage]

need a coil for a Echo 750EVL...

Ugh...I just picked this up, thinking It might be a fuel problem....strike one.

broken clutch cover. strike two

but it's in great shape otherwise... base hit?

J

 

[sefh3]

need a coil for a Echo 750EVL...

Ugh...I just picked this up, thinking It might be a fuel problem....strike one.

broken clutch cover. strike two

but it's in great shape otherwise... base hit?

J

Are there any other Echo's that might take the same coil?