Swap meet...

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
1074

Never thought of posting here. Need a Pioneer 1074 air filter cover. 1073 or p26 might work if they had Walbro carbs. I know everybody is sick of me asking, but as soon as I find (said) cover I can tell you all about the restoration. with pics too. Then on to my Echo CST-610-EVL twin banger.
Rennie
 
Last edited:
I have a echo 650-evl has spark and fuel just wont fire. Also have mccullough power mac 310 and 610 good parts saw's. Looking for a
20" to 24" b&c for my 670 jonsered.
 
Looking for plastics for Stihl 017 mainly need starter, clutch cover, muffler, oiler gear, top cover, throttle lever and airfilter holder. Also need trigger parts and throttle lever for Husky 61, 162, 266 etc... I don't have alot to trade, i have some 034/036 parts like bushings coils, muffler heat shields, generators for heated handles, mufflers some with holes drilled into front covers.
 
026 parts

Im looking for a top cover for an 026 non pro, a muffler cover, possibly a filter cover, and an adjustable carb (wt-194).
 
Hey lookin for a stihl 084 powerhead running or not... Heres what I've got on the trading end

Stihl 046 saw carcass bad crank

Stihl ms460 saw carcass bad crank

Stihl 032 good runner

Stihl 066 carcass without handlebars (coming soon)

stihl 015 runs

stihl 034 runs good needs work and ugly

Husky 288 xp runs great looks ugly
 
Last edited:
I have a couple old Homies and a Craftsman laying around I'd love to trade off. One's a 330 that runs like ish (carb problem) w/ a brand new 20"b&c. Not sure what model the other little Homie 16" is, or even if it runs...was a hand me down that I didn't want in the first place. The Craftsman's almost mint w/ a 18" b&c but it's an old thumb oiler so it never gets used. In fact, it probably hasn't even been started in a handful of years.

I'd off all 3 for a decent set of chaps and/or a Stihl forestry helmet. Shipping not included, obviously.
 
Not a chainsaw or chainsaw part, but it is OPE-related.

Echo SRM Blade Kit #999442-00415. New in box, though the "Danger - stand back 5000000 feet" sign was un-stitched from the sling harness when I borrowed the harness for a day. Includes everything necessary to run a solid blade on one of the trimmers below, except for the blade.

Fits the following, per the product description on some other online retailer: SRM-2101, SRM-2450, SRM-2400SB, SRM-2400, SRM-2301, SRM-230, SRM-2110, SRM-2100SB, SRM-2100, ALL Except SRM-1500/1500A/1501 Below SN 83386, SRM-2601, SRM-2201, SRM-400, SRM-260S, SRM-3001, SRM-310, SRM-3100, SRM-3100S, SRM-340, SRM-3400, SRM-2502, SRM-260

**********************************************************

Also have this vintage small mount Husqvarna bar. .325" pitch, 16". Saw not included.

Husqvarna_238se.jpg
 
Looking for a 440 ign module and flywheel. I have some really nice 025 parts (any part or parts you need excluding piston and cylinder) for exchange. I also have a couple of Homelite and Mac bar/chain combos. In addition, I also have a nice-looking Mac 15 non-runner to offer.
 
Back
Top