Swap meet...

[chainsawwhisperer]

I'm looking for a piston and rings for a Lombard Comango. If you have one laying around PM have parts to trade.

Contact Farley9n, I sent him a couple of Lombard parts saws.
Jim

 

[Guido Salvage]

Stihl 028

I have your muffler. I'm looking for 028 parts. Handlebars, mufflers, plastics.

Are you interested in a whole saw? I got a 028AV Super powerhead in a pile of saws I picked up last week. It is missing the muffler, but otherwise looks complete. Looks like there is some scoring on the P&C. If you need pics, I can send them.

 

[SawGarage]

some needs

Crank bearings and seals for my (POS) 371

chain brake/ clutch cover for J-red 625/630/670

Have lots-o parts and some saws to trade... a small amount of $$ too (saw rich...lol)


J

 

[willysmn]

Lombard saws

Contact Farley9n, I sent him a couple of Lombard parts saws.
Jim

Will XL-12 or Super XL or other Homelite parts fit the Lombards? Seems like they might have a slightly larger bore than the 46mm (1.8125") Super?

Being as Lombards were made in Mass. none made out here to NM. I'd be interested in a rebuildable one .

 

[SawGarage]

Will XL-12 or Super XL or other Homelite parts fit the Lombards? Seems like they might have a slightly larger bore than the 46mm (1.8125") Super?

Being as Lombards were made in Mass. none made out here to NM. I'd be interested in a rebuildable one .

Lombard? what's that :monkey:

ashland MA is 30 min from here...

 

[Guido Salvage]

How much cash for the 026?

How much you got? :hmm3grin2orange: I might be tempted to let mine go.

 

[sefh3]

Contact Farley9n, I sent him a couple of Lombard parts saws.
Jim

Doesn't have them anymore. Anyone else have one that want to trade for or sell?

 

[Wolfcsm]

084 Tillotson HT-5A Carb

Help!!!!

I an in need of the low jet screw for a Tillotson HT-5A carb. Getting ready to send off my 880 to be ported. Have the carb but received it with the jet screw broken at the card housing. Got it out. But need a replacement.

PM me if you can help.

Thanks,

Hal

 

[blsnelling]

Help!!!!

I an in need of the low jet screw for a Tillotson HT-5A carb. Getting ready to send off my 880 to be ported. Have the carb but received it with the jet screw broken at the card housing. Got it out. But need a replacement.

PM me if you can help.

Thanks,

Hal

Pull the L needle out of your stock carb. It may have the same length, taper, and thread.

 

[hoss]

I,m looking for set of rings for a Pioneer P62. I have tons of parts and or greenstuff to trade.

 

[TChainsawM74]

anyone have a Poulan 245a?
pm me if ya do...

 

[blsnelling]

anyone have a Poulan 245a?
pm me if ya do...

How about one rebadged as a Dayton? It's super clean and runs good.

 

[TChainsawM74]

Hmm is it green or orange?

 

[blsnelling]

Hmm is it green or orange?

The Dayton's are orange.

 

[TChainsawM74]

The Dayton's are orange.

hmmm idk im looking for a 245 poulan green in particular....

 

[wigglesworth]

I need some 026 parts. Off the top of my head, I need some side cover screws, front clutch side AV plug, guide bar plate and screw, air filter...and Im sure im forgetting something.

Anyways, let me know what you got.

 

[mowoodchopper]

Anybody got a big saw they wanna trade off! Looking for somthing like a 084
90cc +. I have a few saws I could trade, 026, 10-10 pro, 046, 7900. Pm me if you have any interest.

 

[parrisw]

I need some 026 parts. Off the top of my head, I need some side cover screws, front clutch side AV plug, guide bar plate and screw, air filter...and Im sure im forgetting something.

Anyways, let me know what you got.

If ya shoot me a few part numbers, I check what I got.

Will

 

[Saw Dr.]

I need some 026 parts. Off the top of my head, I need some side cover screws, front clutch side AV plug, guide bar plate and screw, air filter...and Im sure im forgetting something.

Anyways, let me know what you got.

There are two different air filters for the 026. Which one do you have?

 

[wigglesworth]

There are two different air filters for the 026. Which one do you have?

Heck, I dont know. It's not the old brown one, I do know that, but Im not sure what part number it is. I'll look in the A.M.