Swap meet...

[nvrs]

What exactly is the difference between the green bars and the yellow ones?:dunno:

Absolutely nothing except the color... I am just trying to restore this saw back to what it is supposed to be.

 

[logging22]

I have these saw's to sell or trade. All of these run but the 015 and 020. The 020 will run if you want to pull on it long enough but it does not run right the compression is very good though and so is the 015's.<a href="http://s493.photobucket.com/albums/rr293/ms460woodchuck/?action=view&current=jason006.jpg" target="_blank"><img src="http://i493.photobucket.com/albums/rr293/ms460woodchuck/jason006.jpg" border="0" alt="Photobucket"></a>
PM me if your interested.

I want them all. But prolly cant afford any of them.

 

[MS460WOODCHUCK]

I want them all. But prolly cant afford any of them.

Sure you can!

 

[logging22]

Sure you can!

Shipping would be a bummer.

 

[Garden Of Eden]

Still looking for a side cover for an Echo CS300T.

If anyone has one, let me know.

Thanks,

Jeff

:monkey::monkey:

Wife thought the monkey was cute.

 

[DSS]

Shipping would be a bummer.

:agree2::agree2:. Couple there I want too.

 

[TrillPhil]

Still looking for a side cover for an Echo CS300T.

If anyone has one, let me know.

Thanks,

Jeff

:monkey::monkey:

Wife thought the monkey was cute.

I have 2 echo 300s and 2 echo 340s... all are runners however but one has been run without the air filter and compression is fairly low... Post a pic of the part you need.

 

[cbfarmall]

Looking for the following for a C-91 Homelite:

Good crankshaft and rod (mine is hammered out, painful to hear it turn over)
Good A/F cover
Good bar/clutch cover

Really need the crank/rod. The rest is secondary.

I have quite a lot of 045/056 Stihl parts--cases, handles, covers, cylinders, etc..

Chris B.

 

[Eccentric]

I have these saw's to sell or trade. All of these run but the 015 and 020. The 020 will run if you want to pull on it long enough but it does not run right the compression is very good though and so is the 015's.<a href="http://s493.photobucket.com/albums/rr293/ms460woodchuck/?action=view&current=jason006.jpg" target="_blank"><img src="http://i493.photobucket.com/albums/rr293/ms460woodchuck/jason006.jpg" border="0" alt="Photobucket"></a>
PM me if your interested.

Shipping would be a bummer.

:agree2::agree2:. Couple there I want too.

Me three. Those two Homelites would look good in my stable..........but shipping'd kill it.:agree2:

 

[Eccentric]

Looking for the following for a C-91 Homelite:

Good crankshaft and rod (mine is hammered out, painful to hear it turn over)
Good A/F cover
Good bar/clutch cover

Really need the crank/rod. The rest is secondary.

I have quite a lot of 045/056 Stihl parts--cases, handles, covers, cylinders, etc..

Chris B.

Have you pulled it apart yet Chris? Maybe it's just the bearings (and the crank is OK). Seen crank bearings, big-end rollers, and at least one rod on feebay recently...

May have a good clutch cover for it (green for a C91 right?). May not have adjuster bits in it (as I think I remember pillaging them). Gotta dig it out of the spares box to refresh my memory. Don't need those Stihl parts (although I'd like to have an 056 Mag II). If my cover turns out to be what you need/want, then I'm sure we can work something out...

 

[Walt41]

You guys are fast, only the plastic homie and Husky 41 left know.

 

[cbfarmall]

Have you pulled it apart yet Chris? Maybe it's just the bearings (and the crank is OK). Seen crank bearings, big-end rollers, and at least one rod on feebay recently...

May have a good clutch cover for it (green for a C91 right?). May not have adjuster bits in it (as I think I remember pillaging them). Gotta dig it out of the spares box to refresh my memory. Don't need those Stihl parts (although I'd like to have an 056 Mag II). If my cover turns out to be what you need/want, then I'm sure we can work something out...

Definitely the rod. I had the cylinder off and noticed a bit of play but didn't think it too bad till I cranked it over. Yes, green C-91 cover. My current, broken cover has the adjuster stuff.

Chris B.

 

[Garden Of Eden]

I have 2 echo 300s and 2 echo 340s... all are runners however but one has been run without the air filter and compression is fairly low... Post a pic of the part you need.

I'll post one if I need to, but I forgot to snap one earlier. I'm not home right now. It's the side cover with the pull rope. I think it's like 4 screws to get it off. I don't need the spring, or rope, if you want those, just the cover. I dropped the saw about 15 feet and thats all that's happened. Still runs. I may be interested in the whole saw though. Let me know what ya want for either. Also, the 340's, they top handles? Got any pics, or prices?

God bless,

Jeff

 

[atpchas]

I have a Homelite z3300 that needs a top cover, clutch cover, and air filter to make it a good loaner. Thanks for any help you can provide. Have more green than parts.

Charlie

 

[Eccentric]

Definitely the rod. I had the cylinder off and noticed a bit of play but didn't think it too bad till I cranked it over. Yes, green C-91 cover. My current, broken cover has the adjuster stuff.

Chris B.

I see. I'll dig in the parts stash for that cover so I can check it more closely for condition and such...

 

[Work Saw Collector]

Anyone got a David Bradley bar and chain 1/2" for a David Bradley 917-60001 I have a good 20" Looking for one a little longer. Not sure I'd have anything anybody would want but have some cash as well.

 

[mdavlee]

Anyone got a full wrap handle for a 2171?

 

[SawGarage]

I have these saw's to sell or trade. All of these run but the 015 and 020. The 020 will run if you want to pull on it long enough but it does not run right the compression is very good though and so is the 015's.<a href="http://s493.photobucket.com/albums/rr293/ms460woodchuck/?action=view&current=jason006.jpg" target="_blank"><img src="http://i493.photobucket.com/albums/rr293/ms460woodchuck/jason006.jpg" border="0" alt="Photobucket"></a>
PM me if your interested.

Hell, PM sent... shipping is what it is...

Managed to widdle down my original wish list.

Still looking for a 372xp upper rear anti vibe spring and a large mount husky
24" bar (it can be ugly).

Have some cash, 16" .325 Stihl bar, 031 parts, stihl cutoff saw parts etc.

I don't have an ugly one...but I do have a good one.. shoulda AXED MY MAN!! LOL

Almost anything for a pro-mac 610

Info/files for chain sharpening. I want to learn, i'm sick of buying new ones, and I've got a ton of good metal here...

Any of this is flexible with cash too.

Let me know.

God bless,

Jeff

Hey Jeff...I have plenty pm605/610 parts...complete saws too. if you dont find what you need....let me know. I can send a complete running (on prime) powerhead if you want

Anyone got a full wrap for a 2171?

too bad it wasn't a 372... I have a brandy-new take off


I still need a 1/2 wrap for a 066

BAD/Broken chainbrake cover for a Jonsered 625/630/670...
just need the guts!!

husky 340/345/350 top cover, recoil, muffler, top handle & bar adjuster & other odds/ends.

24-32" (or so) bar for LARGE stihl/Dolmar...

plenty to trade, or $$...


J

 

[volks-man]

me wants

i am needing just the plastic pulley inside the recoil of an 026.
024/026, 028 should interchange.
and
a cheap new or like new piston for 038m.

have green to trade.

 

[betterbuilt]

Looking for a air filter mount and cover for a TS760,

also looking for a 076 case in with the crank and oiler.

Any help would be great. Pm me with what you have. Thanks, Bill