Swap meet...

[Scooterbum]

HAhaaaa!! Cool. Didnt I add a port to that muffler? I have another one I think if you want it to use.

Too conservative, was still congested.I doubled what you had,.

 

[Bowtie]

Too conservative, was still congested.I doubled what you had,.

I seem to always go conservative on mods. Dunno why, just me I guess, lol.

I'll send ya another muffler free if you want it, if I have all of it, I think I do. I had most of a spare parts saw for that one.

 

[Scooterbum]

I seem to always go conservative on mods. Dunno why, just me I guess, lol.

I'll send ya another muffler free if you want it, if I have all of it, I think I do. I had most of a spare parts saw for that one.

Muffler I have is fine , thanks !

General rule of thumb is 80% of you exhaust port size.

I have seen as much as 110% before it started back down.

Usually I'll only go above 80% is if I have spare muffler.

 

[tmessenger]

I got a coil for the ms270. Now I need a coil for a 028, or a 026, or a 034, etc...

You need a points coil or electronic ?

 

[WKEND LUMBERJAK]

Looking for av for Partner 5000 plus handle side above clutch cover.

 

[Mastermind]

You need a points coil or electronic ?

Electronic please. The coil is the same on a lot of Stihl saws.

 

[SawGarage]

I am in need of a 20 and or 24 inch bar in 3/8 .050 for a Stihl. The 026-066 mount style. Have a bunch of Stihl parts and some cash. Does not have to be pretty.

Also I was supposed to get a coil for an 028 and a mag tank for an 028 for two different members. I have both but forgot who I was supposed to be getting them for. PM me if its you. LOL.

john, you sure you don't want a .325 20"

Oh, you need a 3/8", and it doesn't have to be pretty? oh boy, have I got a bar for you pics in the am...:jester:

Hope all is well, btw.

 

[SawGarage]

I would like to find a chainbrake setup....But I hear that's a rare bird.

All in all I was very impressed with it. Thanks buddy !!

They are strong, and underrated, IMHO...

chainbrakes are VERY hard to find for that saw...I actually came across one on my 3700, and bought it in a saw-lot.doubled my $ on the 1st saw...friends are good to have!

I heard they were either special order, or up in Canada, and that was from a POULAN guy, on AS actually...

Looking for av for Partner 5000 plus handle side above clutch cover.

what is the part # you need?? I have some NOS Partner parts...

J

 

[wigglesworth]

I have some NOS Partner parts...

J

If you run across a NOS 5000 plus P&C, Im huntin one

 

[SawGarage]

If you run across a NOS 5000 plus P&C, Im huntin one

you NEED both? I KNOW I have quite a few smaller pistons (BIG crown on some of these!!!)

Hey Wigs, do ya have a AV mount, yellow? impulse grommet, throttle rod, choke, muffler stuff (heat shield, bolts, bracket, etc) and recoil spring for the 51/55?

j

 

[SawGarage]

If you run across a NOS 5000 plus P&C, Im huntin one

Gotta ask, we doin' a 50 rancher/P5k+ supersaw?

J

 

[wigglesworth]

you NEED both? I KNOW I have quite a few smaller pistons (BIG crown on some of these!!!)

Hey Wigs, do ya have a AV mount, yellow? impulse grommet, throttle rod, choke, muffler stuff (heat shield, bolts, bracket, etc) and recoil spring for the 51/55?

j

Ill have to do some diggin. Hit me up and remind me to look.

Yea, I could use both P&C, but a piston would be awesome.

 

[wigglesworth]

Gotta ask, we doin' a 50 rancher/P5k+ supersaw?

J

Maybe.....

 

[little possum]

Any chance it's an SL ? (has chain brake)

I dont think so. Ill check later, and try to get some pictures up

 

[SawGarage]

Maybe.....

LOL...gotta love Dr. Evil..

hmmm...something bout him and your Username....hmmmm....

I might just have a low hr 55 EPA closed port avail....:monkey: pulled 180+psi comp....

 

[morning wood]

Looking for a piston for a husky 480cd

 

[jockeydeuce]

Looking for a piston for a husky 480cd

I might have a decent used one.....I'll get back to you.

 

[wigglesworth]

LOL...gotta love Dr. Evil..

hmmm...something bout him and your Username....hmmmm....

I might just have a low hr 55 EPA closed port avail....:monkey: pulled 180+psi comp....

Hmmmmm......Ill gladly take it off your hands.

I need a piston for my closed port 55 top end. Only source is OEM

 

[HittinSteel]

Hmmmmm......Ill gladly take it off your hands.

I need a piston for my closed port 55 top end. Only source is OEM

If you end up with an extra closed port cylinder, I could take it off your hands

Jay refuses to tear a part his perfectly good 55 so I can have the closed port P/C for my shiny near new straight gassed 55. :monkey: :greenchainsaw:

 

[SawGarage]

Hmmmmm......Ill gladly take it off your hands.

I need a piston for my closed port 55 top end. Only source is OEM

send me the top end, and i'll send you a piston

Not true. make one. Drill and/or dremel if you want windows.


which is better, the P5k+, or the 55 closed port??

If you end up with an extra closed port cylinder, I could take it off your hands

Jay refuses to tear a part his perfectly good 55 so I can have the closed port P/C for my shiny near new straight gassed 55. :monkey: :greenchainsaw:

I never said that! anything for you Bryan!! :spam:

J