Swap meet...

[Chris J.]

Looking for anything that needs some tlc....want to start flipping saws on the side. I got a few things to trade, but i will pay cash for saw and shipping if needed.

Are you looking for newer saws (might be easier to flip), or older ones? My Jonsered 630 would be a good project (can send photos), or the Ward/Remington would probably just need some basic TLC (photos are here on AS).

 

[lpmfg]

Looking for

stihl 056 mag Piston, Muffler, Killswitch, and Handle (the orange one, not the grip loop)

jonsy 920 brake handle or braking assy.

stihl 026 air filter, air filter cover, brake handle, brake cover and assy, also need the clutch cover.

need small bar 14" or 16" for a stihl 3/8 or .325 I dont care and I need a large bar something in the 30" plus for a jons 920 3/8 drive

email me [email protected]

 

[lpmfg]

Are you looking for newer saws (might be easier to flip), or older ones? My Jonsered 630 would be a good project (can send photos), or the Ward/Remington would probably just need some basic TLC (photos are here on AS).

can you email me the 630 info i may be interested. [email protected]

 

[Chris J.]

can you email me the 630 info i may be interested. [email protected]

Slow down. Cutting in line isn't cool. Since I was first offering it to Clay, I should give him a chance to reply. Right?

 

[SawGarage]

Looking for

stihl 056 mag Piston, Muffler, Killswitch, and Handle (the orange one, not the grip loop)


need small bar 14" or 16" for a stihl 3/8 or .325 I dont care and I need a large bar something in the 30" plus for a jons 920 3/8 drive

email me [email protected]

I have some NOS parts...if your needing. I KNOW I have a handle, and a muffler....
I SHOULD have the kill switch, as well...

Should have the bar for you also...

J

 

[lpmfg]

I have some NOS parts...if your needing. I KNOW I have a handle, and a muffler....
I SHOULD have the kill switch, as well...

Should have the bar for you also...

J

let me know, [email protected]

Chris J.

Let me know if something happens with him, I would be interested as well.

 

[SawGarage]

let me know, [email protected]

email sent...

 

[tbone75]

031 Stihl coil

Anyone have a coil for a 031?

 

[SawGarage]

268-272 stuff...

looking for some 268-272 intake parts...

larger filter and elbow
carb
intake boot, etc...

have dirty green paper, parts, and opinions to trade


J

 

[Jon1212]

I'm still looking for some 2100CD parts. I am in need of the top plastics(cylinder cover, and airfilter cover), kill switch, and the choke lever grommet. For trade I have a couple of MiniMacs1A/and 6, or a teenager(neither work that great, but the saw has hope) a Homie SuperEZ that needs some TLC, or crumpled green paper.
Jonathan

 

[tbone75]

I'm still looking for some 2100CD parts. I am in need of the top plastics(cylinder cover, and airfilter cover), kill switch, and the choke lever grommet. For trade I have a couple of MiniMacs1A/and 6, or a teenager(neither work that great, but the saw has hope) a Homie SuperEZ that needs some TLC, or crumpled green paper.
Jonathan

Them teenagers are hard to move!Can't get nothing for them.I have one I would like to trade off!Just can't get any takers? LOL

 

[nmurph]

Jeez, you guys give a lot of hope to the father of a 7YO, already full of testosterone, boy!!!!

 

[bigblockburris]

034/036 Recoil

Still need a 034/036 recoil BAD!!!

Thanks!

BBB

 

[Chris J.]

I'm still looking for some 2100CD parts. I am in need of the top plastics(cylinder cover, and airfilter cover), kill switch, and the choke lever grommet. For trade I have a couple of MiniMacs1A/and 6, or a teenager(neither work that great, but the saw has hope) a Homie SuperEZ that needs some TLC, or crumpled green paper.
Jonathan

FWIW--I'm not familiar with Huskys, but Thieroff has 2101 PHO listed for trade.

 

[Jon1212]

FWIW--I'm not familiar with Huskys, but Thieroff has 2101 PHO listed for trade.

Thanks man, yeah him and I talked about that last night, but we decided his 2101 was to close to a runner to start yanking parts off of. Good looking out though.
Jonathan

 

[67L36Driver]

Jeez, you guys give a lot of hope to the father of a 7YO, already full of testosterone, boy!!!!

Your turn in the barrel coming up!:msp_tongue:

Even as adults when they are moved out/married they are trouble!:msp_w00t:

Major benefit is grandkids.

 

[nmurph]

Major benefit is grandkids.

Well, I'm already old enough to have those too. The favorable winds didn't turn my way until I got older and met my wife. It has been smooth sailing (mostly!!) from there. I couldn't ask for a better son. I thank God everyday for that blessing. If the grands are even better, I may find him an Indian bride and get her promised off to him early!

 

[blue dog]

I have these to trade engines turn thats all I know about them. I don't even know if there worth anything.

looking for 372xp stuff

good OEM muffler un-mod no rust
bar
let me know what you got

 

[blue dog]

I also have this thing I have no use for.

Chrysler Sno-rabbit rare need work will run for a few seconds if you splash gas in carb. gas tank and carb is clean gas was drained before it was stored but the dirafram in the carb is hard parts are still aviable at Home Page

 

[Arrowhead]

Anybody interested in a Mac D30? It runs, but can use some minor tlc. It does not use bar oil to lube the chain, it uses the fuel mix instead. I ran it at Seans GTG last summer and the deal that lubes the chain wasn't working. Mac guru Heimannnm was there and explained how to fix it. I just have too many other projects. I'm always looking for Partner 500/5000 saws/parts. Also larger P series Pioneer parts. I'm open to anything though.